Język
Kraj/region
Masz już konto?
Zaloguj się, aby szybciej realizować zakupy.
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Brak na stanie
Nie można załadować gotowości do odbioru
Purple ASA Filament 1.75 in a 250 g spool (100 m) is the kind of filament you keep around for specific tasks. Not a bulk roll, not something excessive — just enough to test, adjust, or print a few parts without overcommitting material.
Once your printer profile is dialed in, Purple ASA Filament 1.75 tends to behave in a calm, predictable way. The flow stays even, layer by layer, which makes a difference when prints run longer than expected. You’re not constantly checking on it — and that’s usually a good sign.
There are plenty of situations where a full 1 kg spool is simply too much. A 250 g (100 m) roll works better when you're dialing in tolerances, testing fit, or printing a single functional part.
Even in this smaller format, ASA Filament 1.75 keeps the same behavior. Parts come out with stable dimensions, and once settings are locked in, results tend to repeat without surprises.
ASA is rarely picked for decorative prints. It’s more about parts that need to function — especially when they’ll be exposed to changing conditions.
ASA Filament Purple is often used for housings, mounts, or mechanical elements. In practice, it holds its shape and doesn’t introduce unexpected issues after printing.
Purple sits somewhere between neutral and bold. It’s noticeable, but not distracting, which makes it useful when parts need to be identified without overwhelming the design.
Purple ASA Filament keeps a consistent tone across layers. That matters more than it seems — especially on flat surfaces where uneven color would be obvious.
ASA Filament Purple doesn’t demand constant adjustments once your setup is right. The extrusion remains stable, and prints tend to come out the same way each time.
Purple ASA Filament 1.75, even in a 250 g (100 m) spool, gives you that consistency. For small batches, prototypes, or controlled projects, it’s simply easier to manage without sacrificing performance.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 250g |
| Filament length | 100 m |
| Filament color | Purple |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
