Język
Kraj/region
Masz już konto?
Zaloguj się, aby szybciej realizować zakupy.
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Brak na stanie
Nie można załadować gotowości do odbioru
Lime Green ASA Filament 1.75 in a 250 g spool (100 m) is a convenient option when you need a smaller amount of material without changing how it performs in print. It’s often used for testing, calibration, or small functional parts where control over material usage matters.
In everyday 3D printing, Lime Green ASA Filament 1.75 behaves in a stable and predictable way once settings are dialed in. The filament feeds evenly, and extrusion remains consistent, which helps maintain clean layer structure and reduces unexpected print issues.
The 250 g (100 m) spool is well suited for prototyping or single-part production. It allows you to test models or fine-tune settings without committing to a full spool.
ASA Filament 1.75 maintains consistent dimensional behavior regardless of spool size. This helps ensure parts come out accurate and repeatable, even during smaller print runs.
ASA is commonly used in FDM printers for parts exposed to sunlight and temperature changes. It performs more reliably in these environments compared to many basic filaments.
ASA Filament Lime Green is often used for brackets, housings, and technical components. In practice, it holds its form well when durability is required.
Lime Green stands out clearly, making printed parts easy to identify or separate from other components. This is useful in workshops, technical builds, or any setup where visibility matters.
Lime Green ASA Filament maintains an even and consistent shade across layers. The surface stays uniform, even on flat or detailed areas.
ASA Filament Lime Green is known for steady extrusion once properly tuned. The material flows evenly, helping reduce the risk of defects.
Lime Green ASA Filament 1.75 provides reliable layer adhesion and consistent printing results. With the 250 g (100 m) spool, it becomes a practical choice for controlled projects and smaller print batches.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 250g |
| Filament length | 100 m |
| Filament color | Lime Green |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
