Language
Country/Region
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Out of stock
Couldn't load pickup availability
White ASA Filament 1.75 in a 250 g spool (100 m) is a practical option when you need a limited amount of material but still want consistent, reliable results. It’s often used for calibration, prototyping, or printing small functional parts where precision matters more than volume.
Once your printer profile is set, White ASA Filament 1.75 tends to run smoothly without constant adjustments. The material feeds evenly, and extrusion remains stable, helping maintain clean layers and reducing the risk of visible defects.
The 250 g (100 m) format is ideal for short runs or single-part prints. It allows you to test designs or fine-tune settings without opening a full spool.
ASA Filament 1.75 maintains consistent dimensional behavior regardless of spool size. This makes it easier to achieve accurate and repeatable results, especially for parts that need to fit together precisely.
ASA is widely used in FDM printers for parts exposed to sunlight and temperature changes. It performs more reliably in these conditions than many basic filaments.
ASA Filament White is often used for brackets, housings, and mechanical components. In real use, it maintains its structure and doesn’t introduce unexpected issues after printing.
White gives printed parts a simple, neutral appearance. It’s often chosen for prototypes or components that may be painted or modified later.
White ASA Filament maintains a consistent shade across layers. Even on flat or larger surfaces, the color remains even and visually clean.
ASA Filament White is known for steady extrusion once settings are dialed in. The material flows evenly, reducing the likelihood of print issues.
White ASA Filament 1.75, in this 250 g (100 m) spool, provides reliable layer adhesion and predictable results. It’s a convenient choice for controlled projects and smaller print runs.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 250g |
| Filament length | 100 m |
| Filament color | White |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
