Language
Country/Region
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Out of stock
Couldn't load pickup availability
Silver ASA Filament 1.75 in a 250 g spool (100 m) is a straightforward choice when you need a limited amount of material but still expect consistent performance. It’s often used for test prints, fine-tuning settings, or producing smaller functional parts without opening a full-size spool.
Once your printer is properly configured, Silver ASA Filament 1.75 runs smoothly and without much intervention. The filament feeds evenly, and extrusion stays consistent, which helps maintain clean layer lines and reduces the chance of defects.
The 250 g (100 m) format works well when you’re printing a specific part or testing a design. It gives you enough material to complete the task without unnecessary leftovers.
ASA Filament 1.75 maintains stable dimensional behavior regardless of spool size. This makes it easier to achieve accurate and repeatable results, especially when parts need to fit together precisely.
ASA is widely used in FDM printers for parts exposed to outdoor conditions or temperature changes. It performs more reliably in these environments than many basic filaments.
ASA Filament Silver is often used for housings, mounts, and mechanical components. In real use, it keeps its structure and doesn’t introduce unexpected issues after printing.
Silver gives printed parts a neutral, technical appearance. It’s often chosen for components where a clean and consistent finish matters more than bold color.
Silver ASA Filament maintains an even shade across layers. Even on flat or larger surfaces, the color remains uniform and visually consistent.
ASA Filament Silver is known for steady extrusion once your settings are dialed in. The material flows evenly, reducing the likelihood of print issues.
Silver ASA Filament 1.75, in this 250 g (100 m) spool, provides reliable layer adhesion and predictable results. It’s a practical option for controlled projects and smaller print runs where consistency is key.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 250g |
| Filament length | 100 m |
| Filament color | Silver |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
