Language
Country/Region
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Out of stock
Couldn't load pickup availability
Red ASA Filament 1.75 in a 750 g spool (300 m) is a solid choice when you need more material than a test roll but don’t want to commit to a full kilogram. It fits naturally into workflows where printing is regular, but each project may vary in size.
Once your printer is dialed in, Red ASA Filament 1.75 runs smoothly without demanding constant adjustments. The extrusion remains steady, and layers build up evenly, which is especially noticeable on longer prints.
The 750 g (300 m) spool works well for medium batches or larger single parts. It gives you enough material to complete several prints without frequent spool swaps, which keeps the process more efficient.
ASA Filament 1.75 maintains consistent dimensional behavior. Parts tend to come out accurate and repeatable, which matters when components need to fit together cleanly.
ASA is widely used in FDM printers for parts that are exposed to real conditions — including sunlight and temperature changes. It holds its structure better over time than many standard filaments.
ASA Filament Red is often used for enclosures, mounts, and structural elements. In practice, it performs reliably where both durability and visibility are required.
Red is one of the easiest colors to spot, which makes it useful when parts need to stand out or be quickly identified in a setup.
Red ASA Filament keeps a consistent shade across layers. Even on larger surfaces, the color stays even and doesn’t introduce visual inconsistencies.
ASA Filament Red is known for predictable extrusion once your settings are in place. The material flows evenly, reducing the chance of defects during printing.
Red ASA Filament 1.75, in this 750 g (300 m) format, gives you a reliable balance — enough material for ongoing work, with consistent behavior from start to finish.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 750g |
| Filament length | 300 m |
| Filament color | Red |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
