Language
Country/Region
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Out of stock
Couldn't load pickup availability
Yellow ASA Filament 1.75 in a 750 g spool (300 m) is a practical option when you need a solid amount of material without jumping straight to a full 1 kg roll. It fits well into regular workflows where you’re printing often but still want flexibility.
Once your printer is properly tuned, Yellow ASA Filament 1.75 runs smoothly with minimal intervention. The extrusion stays even, and layers build up cleanly, which makes a noticeable difference on longer prints.
The 750 g (300 m) format works well for medium-sized projects or small batches. You can move through several prints without frequent filament changes, which helps keep the workflow efficient.
ASA Filament 1.75 maintains consistent dimensional behavior. Parts come out accurate and repeatable, which is important when components need to fit together properly.
ASA is widely used in FDM printers for parts exposed to sunlight and temperature changes. It holds its structure better over time compared to many standard materials.
ASA Filament Yellow is often used for enclosures, mounts, and structural components. In practice, it performs reliably where durability and visibility are both important.
Yellow is one of the most visible colors in a workshop or technical setup. It helps parts stand out and makes them easier to identify during assembly or use.
Yellow ASA Filament keeps a consistent shade across layers. Even on larger prints, the color remains even and doesn’t create visual inconsistencies.
ASA Filament Yellow is known for steady extrusion once your settings are dialed in. The material flows evenly, reducing the likelihood of defects.
Yellow ASA Filament 1.75, in this 750 g (300 m) spool, gives you a reliable balance — enough material for ongoing work, with consistent behavior from start to finish.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 750g |
| Filament length | 300 m |
| Filament color | Yellow |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
