Language
Country/Region
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Out of stock
Couldn't load pickup availability
Yellow ASA Filament 1.75 in a 250 g spool (100 m) is a practical choice when you don’t need a full roll but still want dependable results. It’s often used for test prints, quick iterations, or smaller functional parts where material control matters.
Once your printer is properly set up, Yellow ASA Filament 1.75 runs in a stable and predictable way. The filament feeds evenly, and extrusion remains consistent, helping keep layers clean and reducing the chance of defects during printing.
The 250 g (100 m) format works well when you’re focusing on a specific part or dialing in settings. It gives you enough material to complete the job without leaving excess unused filament.
ASA Filament 1.75 maintains consistent dimensional behavior regardless of spool size. This helps ensure printed parts remain accurate and repeatable, even in smaller batches.
ASA is widely used in FDM printers for components exposed to sunlight and temperature changes. It performs better in these environments than many standard materials.
ASA Filament Yellow is often used for brackets, housings, and technical components. In practice, it holds its structure and performs reliably where durability is required.
Yellow stands out clearly, making printed parts easy to identify or separate from other components. This is useful in technical setups or organized workflows.
Yellow ASA Filament maintains a consistent shade across layers. Even on flat or larger surfaces, the color remains even and visually clean.
ASA Filament Yellow is known for steady extrusion once settings are dialed in. The material flows evenly, reducing the likelihood of print issues.
Yellow ASA Filament 1.75, in this 250 g (100 m) spool, provides reliable layer adhesion and consistent results. It’s a convenient option for controlled projects and smaller print runs.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 250g |
| Filament length | 100 m |
| Filament color | Yellow |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
