Language
Country/Region
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Out of stock
Couldn't load pickup availability
Orange ASA Filament 1.75 in a 250 g spool (100 m) is a practical option when you need a smaller amount of material but still want predictable performance. It’s often used for test prints, calibration, or short production runs where material control is important.
In everyday 3D printing, Orange ASA Filament 1.75 behaves in a stable and consistent way once the printer is tuned. The filament feeds smoothly, and extrusion remains even, helping maintain clean layers and reducing the chance of defects.
The 250 g (100 m) spool is well suited for prototyping or printing specific parts. It allows you to experiment or finalize settings without committing to a full spool.
ASA Filament 1.75 maintains steady dimensional behavior regardless of spool size. This helps ensure printed parts remain accurate and repeatable, even in smaller batches.
ASA is widely used in FDM printers for parts exposed to sunlight and temperature changes. It performs better in these environments than many standard materials, helping parts keep their structure over time.
ASA Filament Orange is often used for brackets, housings, and mechanical components. In practice, it remains reliable where both durability and visibility are needed.
Orange makes printed parts easy to notice and distinguish from other components. This is especially useful in technical setups or workshop environments.
Orange ASA Filament maintains a consistent shade across layers. Even on flat or larger surfaces, the color remains even and clean.
ASA Filament Orange is known for steady extrusion once properly tuned. The material flows evenly, reducing the likelihood of print issues.
Orange ASA Filament 1.75 provides reliable layer adhesion and consistent results. Combined with the 250 g (100 m) spool, it becomes a convenient choice for controlled projects and smaller print runs.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 250g |
| Filament length | 100 m |
| Filament color | Orange |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
