Language
Country/Region
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Out of stock
Couldn't load pickup availability
Silver ASA Filament 1.75 in a 750 g spool (300 m) sits right in that practical middle zone — more than enough for ongoing work, but without the commitment of a full 1 kg roll. It’s a format that fits well when you’re printing regularly and want to keep material usage under control.
In real printing conditions, Silver ASA Filament 1.75 tends to run smoothly once your settings are dialed in. The extrusion stays even, layer after layer, which helps maintain a clean surface and reduces the chances of issues during longer prints.
The 750 g (300 m) format works well for medium-sized projects or small production runs. You can move through multiple prints without constantly changing filament, which keeps your workflow more efficient.
ASA Filament 1.75 maintains consistent dimensional behavior. Parts tend to come out accurate and repeatable, which is especially important for components that need to fit together cleanly.
ASA is widely used in FDM printers for functional parts that may be exposed to sunlight or varying temperatures. It holds its structure better over time compared to many standard materials.
ASA Filament Silver is often used for enclosures, mounts, and mechanical elements. In practice, it performs reliably in conditions where stability matters.
Silver gives printed parts a neutral, precise look. It works well for components where a clean and structured appearance is preferred over bold colors.
Silver ASA Filament keeps a consistent shade across layers. Even on larger prints, the surface remains even, which helps achieve a more refined final result.
ASA Filament Silver is known for stable extrusion once your profile is set. The material flows evenly, reducing the likelihood of defects.
Silver ASA Filament 1.75, in this 750 g (300 m) spool, offers a reliable balance — enough material for real work, with predictable behavior from start to finish.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 750g |
| Filament length | 300 m |
| Filament color | Silver |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
