Język
Kraj/region
Masz już konto?
Zaloguj się, aby szybciej realizować zakupy.
Plexiwire
ASA is an engineering-grade material that combines the strength and heat resistance of ABS with enhanced resistance to ultraviolet radiation and weather conditions.
Brak na stanie
Nie można załadować gotowości do odbioru
Purple ASA Filament 1.75 in a 750 g spool (300 m) is a practical middle-ground option when you’re printing regularly but don’t always need a full 1 kg roll. It gives enough material for multiple parts while still keeping things manageable on the printer.
Once your setup is dialed in, Purple ASA Filament 1.75 tends to run without surprises. The extrusion stays even, and layers build up cleanly, which is exactly what you want when prints start taking several hours instead of minutes.
The 750 g (300 m) format makes sense when you’re working on ongoing projects or small batches. You’re not constantly swapping filament, but you’re also not committing to a full spool for every job.
ASA Filament 1.75 keeps its dimensional consistency across the entire spool. That becomes noticeable when parts need to fit together properly — especially in mechanical or functional prints.
ASA is not just about appearance. It’s commonly used in FDM printers for parts that end up outside or deal with temperature changes over time.
ASA Filament Purple works well for housings, brackets, and structural elements. In practice, it holds its shape and doesn’t introduce unexpected issues after printing.
Purple is distinctive enough to separate parts visually, but it doesn’t overwhelm the design. It’s often used when you want components to be easy to identify without going too bright.
Purple ASA Filament keeps a consistent shade across layers. Even on larger prints, the color stays uniform, which helps the final part look clean and intentional.
ASA Filament Purple doesn’t require constant adjustments once your profile is set. The flow remains steady, which reduces the chance of defects mid-print.
Purple ASA Filament 1.75, in this 750 g (300 m) format, gives you a good balance — enough material for real work, with the same predictable behavior from start to finish.
| Nozzle temperature | 260–270 °C |
| Bed temperature | 90 - 100 °C |
| Volumetric flow rate | up to 12 mm³/s |
| Cooling | minimal or off |
| Enclosure | recommended for large models |
| Filament diameter | 1.75 mm |
| Net weight | 750g |
| Filament length | 300 m |
| Filament color | Purple |
| Density | 1.07 g/cm³ |
| Vicat softening temperature | ≈ 94 °C |
| Heat resistance | up to 93 °C |
| Build surface | PEI, glass with adhesive, Magigoo, Dimafix |
| Surface finish | Semi-matte or glossy after post-processing |
| UV resistance | High |
| Mechanical strength | High |
For stable printing, use a heated build plate and an enclosed chamber. Avoid drafts — ASA is sensitive to sudden airflows. After printing, store the spool in a dry container to prevent moisture absorption.
ASA by Plexiwire is a reliable filament that combines technical strength with ease of printing. Resistant to time, sunlight, and mechanical stress — perfect for your most demanding projects.
