{"title":"ABS Filament","description":"\u003ch2\u003eA durable, machinable engineering material\u003c\/h2\u003e\n\u003cp\u003eAmong 3D printing filaments, ABS is suited to applications beyond the range of PLA and PETG: parts exposed to heat, parts that are drilled and tapped, and parts subject to repeated mechanical stress. It prints on any enclosed 3D printer. It is the material used in many power tool housings, and it accepts sanding, acetone welding and finishing to a gloss surface.\u003c\/p\u003e\n\u003ch2\u003ePrint settings and warping\u003c\/h2\u003e\n\u003cp\u003ePrint at 235–250 °C with a 90–110 °C bed.\u003c\/p\u003e\n\u003cp\u003eABS contracts as it cools, and contraction combined with air movement can cause corners to lift from the plate. An enclosure, a draught-free environment and minimal part cooling are necessary for reliable results. Without an enclosure, ABS is difficult to print reliably on parts larger than a small footprint. This is inherent to the material rather than a fault of any particular brand.\u003c\/p\u003e\n\u003ch2\u003eHeat resistance\u003c\/h2\u003e\n\u003cp\u003eABS remains rigid to approximately 95 °C, compared with roughly 60 °C for PLA. This margin is the primary reason to accept the additional handling requirements: parts near heat sources or in high-temperature environments perform where PLA would not.\u003c\/p\u003e\n\u003ch2\u003eVentilation\u003c\/h2\u003e\n\u003cp\u003eABS emits styrene and ultrafine particles during printing, accompanied by a noticeable odour. It is not acutely hazardous, but prolonged printing in an unventilated room is not advisable. Use an enclosure, vent or filter the exhaust, and ventilate the space. Where this is not possible, PETG or ASA is a practical alternative with minimal compromise.\u003c\/p\u003e\n\u003ch2\u003eDrying\u003c\/h2\u003e\n\u003cp\u003eABS absorbs less moisture than Nylon but enough to cause bubbling and weak layers when stored open. Dry at 65–70 °C for 4 to 6 hours.\u003c\/p\u003e\n\u003ch2\u003eColours and spools\u003c\/h2\u003e\n\u003cp\u003e16 colours: Black, White, Gray, Silver, Natural, Red, Maroon, Orange, Yellow, Green, Lime Green, Blue, Light Blue, Purple, Pink and Brown. Spools of 250 g \/ 100 m, 750 g \/ 300 m and 1 kg \/ 400 m.\u003c\/p\u003e\n\u003cp\u003eFor reduced warping on large flat parts, see ABS+. For outdoor applications, see ASA.\u003c\/p\u003e","products":[{"product_id":"abs-filament-1-75mm-maroon-250g-100m","title":"ABS Maroon 1,75mm 250g\/100m","description":"\u003ch3\u003eA Practical ABS Filament for Functional Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003emaroon abs filament 1.75\u003c\/strong\u003e is intended for makers who prefer a dependable material for everyday 3D printing. ABS has remained a widely used plastic in FDM printing because it offers durability and stable behavior when producing functional components.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers that use the standard filament format.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often used when printed parts need to maintain structural stability or become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Distinct Color for Prototypes and Workshop Parts\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament maroon\u003c\/strong\u003e becomes a useful option when producing components such as brackets, housings, mounts, and other functional elements. These types of parts benefit from the structural consistency that ABS provides.\u003c\/p\u003e \u003cp\u003eThe maroon color offers a deeper tone than many standard filaments. Many users choose \u003cstrong\u003emaroon abs filament\u003c\/strong\u003e when they want printed components that stand out slightly while still maintaining a technical appearance.\u003c\/p\u003e \u003cp\u003eColor variation can also help during development work, making it easier to distinguish specific parts or versions of a prototype.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion in Everyday Printing\u003c\/h3\u003e \u003cp\u003eStable material flow plays an important role in reliable FDM printing. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth extrusion through the hotend and supports consistent layer adhesion during the printing process.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains steady, printed parts tend to maintain their intended geometry more accurately. This becomes particularly important when parts must align with other mechanical components.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003emaroon abs filament 1.75\u003c\/strong\u003e when printing workshop tools, functional prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Development\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is convenient when testing new designs or producing smaller batches of parts. It provides enough filament for design experiments without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work, design iterations, and functional prints, this \u003cstrong\u003emaroon abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Maroon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eABS has a huge number of uses. Among them are: housings for electronics, household appliances, car parts, medical equipment, children's toys, sports equipment, household products, pipes and fittings, and much more. In general, plastic is excellent for general modeling and prototyping in all areas of industry and design as well as for creating machine parts and mechanisms, where high mechanical strength is primarily required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABS Printing Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is important to prepare the table for printing by ensuring that the first layer adheres well, sometimes it will be difficult to avoid curled edges of the model. Anything that is on hand or recommended by 3D printing enthusiasts will do, from hairspray to masking tape. At the same time, you also need to carefully remove a well-adhered model - a good construction spatula helps. When printing, it is important to cover the printer or the printable area to prevent external influences. It is very important to eliminate drafts or airflow - they can impair adhesion, especially on large models. Also, for better print quality, it is better to print at a speed of no higher than 50-60 mm \/ s. This will give the layers a chance to stick together better. At the same time, it is also important to ensure the ventilation of the room or leave the room during the printing process - toxic substances that are harmful to humans are released during the melting of ABS. The recommended filling level of the model is 95-96%. At a higher filling, internal stress causes the part to warp and reduces dimensional accuracy. Post-processing is carried out with dichloromethane, acetone and other substances. This primarily smoothes the surface and adds gloss, although it can also improve adhesion.\u003c\/p\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47959928602964,"sku":"ABS-111100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-maroon-100_4711effc-f9dd-4644-b68f-ba0342c0ea97.jpg?v=1765294445"},{"product_id":"abs-filament-1-75mm-black-250g-100m","title":"ABS Black 1,75mm 250g\/100m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eblack abs filament 1.75\u003c\/strong\u003e is intended for makers who rely on dependable materials for regular 3D printing. ABS has remained a widely used plastic in FDM printing for many years, especially when printed parts need durability and structural strength rather than purely decorative detail.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the material fits most desktop FDM printers that support the standard filament size.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often used when printed objects must remain stable during everyday use or when parts are intended for functional assemblies.\u003c\/p\u003e \u003ch3\u003eA Material Commonly Used for Functional Parts\u003c\/h3\u003e \u003cp\u003eFor many workshops, \u003cstrong\u003eabs filament black\u003c\/strong\u003e becomes a reliable option when producing mechanical components or practical accessories. Brackets, housings, mounts, and small workshop tools are typical prints where ABS performs well.\u003c\/p\u003e \u003cp\u003eThe black color is often preferred for technical or mechanical prints. Many makers choose \u003cstrong\u003eblack abs filament\u003c\/strong\u003e when creating components that need to visually match machines, tools, or other equipment.\u003c\/p\u003e \u003cp\u003eIn prototype development, using darker filament colors can also make it easier to distinguish functional parts from decorative test prints.\u003c\/p\u003e \u003ch3\u003eStable Extrusion and Reliable Printing\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, predictable extrusion helps avoid interruptions during longer prints. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain steady material flow through the extruder and supports solid layer adhesion throughout the print.\u003c\/p\u003e \u003cp\u003eThis becomes particularly important when printing objects that must maintain their shape or fit together with other components.\u003c\/p\u003e \u003cp\u003eBecause of that, many users rely on \u003cstrong\u003eblack abs filament 1.75\u003c\/strong\u003e when producing workshop parts, mechanical prototypes, or replacement components.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Small Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is convenient for experimenting with designs or printing smaller batches of parts. It allows makers to test settings, prototypes, or mechanical components without committing to a full-size spool.\u003c\/p\u003e \u003cp\u003eFor design iterations, functional prints, or small workshop projects, this \u003cstrong\u003eblack abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eABS has a huge number of uses. Among them are: housings for electronics, household appliances, car parts, medical equipment, children's toys, sports equipment, household products, pipes and fittings, and much more. In general, plastic is excellent for general modeling and prototyping in all areas of industry and design as well as for creating machine parts and mechanisms, where high mechanical strength is primarily required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABS Printing Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is important to prepare the table for printing by ensuring that the first layer adheres well, sometimes it will be difficult to avoid curled edges of the model. Anything that is on hand or recommended by 3D printing enthusiasts will do, from hairspray to masking tape. At the same time, you also need to carefully remove a well-adhered model - a good construction spatula helps. When printing, it is important to cover the printer or the printable area to prevent external influences. It is very important to eliminate drafts or airflow - they can impair adhesion, especially on large models. Also, for better print quality, it is better to print at a speed of no higher than 50-60 mm \/ s. This will give the layers a chance to stick together better. At the same time, it is also important to ensure the ventilation of the room or leave the room during the printing process - toxic substances that are harmful to humans are released during the melting of ABS. The recommended filling level of the model is 95-96%. At a higher filling, internal stress causes the part to warp and reduces dimensional accuracy. Post-processing is carried out with dichloromethane, acetone and other substances. This primarily smoothes the surface and adds gloss, although it can also improve adhesion.\u003c\/p\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47960420385108,"sku":"ABS-108100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-black-100_42e07c85-65cb-4170-b391-345d1ccd939e.jpg?v=1765294211"},{"product_id":"abs-filament-1-75mm-red-250g-100m","title":"ABS Red 1,75mm 250g\/100m","description":"\u003ch3\u003eA Familiar ABS Filament for Practical Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003ered abs filament 1.75\u003c\/strong\u003e is intended for makers who want a dependable material for everyday FDM printing. ABS has remained a popular choice for functional parts because it offers solid durability and predictable printing behavior across many desktop printers.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits most FDM printers designed for standard filament sizes.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often selected when printed parts need to hold their shape well or when components will be used inside mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Color That Helps Parts Stand Out\u003c\/h3\u003e \u003cp\u003eFor many workshop projects, color is more than just aesthetics. \u003cstrong\u003eabs filament red\u003c\/strong\u003e is often used when printed components need to be easy to see during assembly or testing.\u003c\/p\u003e \u003cp\u003eBrackets, housings, mounts, and various mechanical parts are common prints where ABS performs reliably. Many users choose \u003cstrong\u003ered abs filament\u003c\/strong\u003e when they want certain components to stand out clearly or when different prototype versions need to be separated visually.\u003c\/p\u003e \u003cp\u003eIn busy workspaces, strong color contrast can also help identify parts more quickly on the workbench.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Reliable Prints\u003c\/h3\u003e \u003cp\u003eStable material flow plays a major role in successful printing. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth feeding through the hotend and supports steady layer adhesion during the print.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains consistent, printed objects tend to keep their intended geometry more accurately. This becomes especially important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003ered abs filament 1.75\u003c\/strong\u003e is often used for workshop tools, functional prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Compact Spool for Testing and Small Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool offers a practical amount of filament for experimenting with designs or producing smaller batches of parts. It allows makers to test printing settings and iterate on prototypes without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work and functional prints, this \u003cstrong\u003ered abs filament 1.75\u003c\/strong\u003e provides a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eABS has a huge number of uses. Among them are: housings for electronics, household appliances, car parts, medical equipment, children's toys, sports equipment, household products, pipes and fittings, and much more. In general, plastic is excellent for general modeling and prototyping in all areas of industry and design as well as for creating machine parts and mechanisms, where high mechanical strength is primarily required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABS Printing Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is important to prepare the table for printing by ensuring that the first layer adheres well, sometimes it will be difficult to avoid curled edges of the model. Anything that is on hand or recommended by 3D printing enthusiasts will do, from hairspray to masking tape. At the same time, you also need to carefully remove a well-adhered model - a good construction spatula helps. When printing, it is important to cover the printer or the printable area to prevent external influences. It is very important to eliminate drafts or airflow - they can impair adhesion, especially on large models. Also, for better print quality, it is better to print at a speed of no higher than 50-60 mm \/ s. This will give the layers a chance to stick together better. At the same time, it is also important to ensure the ventilation of the room or leave the room during the printing process - toxic substances that are harmful to humans are released during the melting of ABS. The recommended filling level of the model is 95-96%. At a higher filling, internal stress causes the part to warp and reduces dimensional accuracy. Post-processing is carried out with dichloromethane, acetone and other substances. This primarily smoothes the surface and adds gloss, although it can also improve adhesion.\u003c\/p\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47960468029780,"sku":"ABS-105100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-red-100_b9c20981-be84-41ef-8b5c-b48c1ad43b17.jpg?v=1765294088"},{"product_id":"abs-filament-1-75mm-lime-green-250g-100m","title":"ABS Lime Green 1,75mm 250g\/100m","description":"\u003ch3\u003eA Bright ABS Filament for Everyday 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003elime green abs filament 1.75\u003c\/strong\u003e is designed for makers who want a reliable material with a color that stands out during printing and assembly. ABS has remained a widely used plastic in FDM printing for years because it offers durability and predictable behavior when producing functional parts.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits most desktop FDM printers designed for the standard filament size.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often selected for parts that need to remain structurally stable during use or when printed components become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Color That Makes Parts Easy to Identify\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament lime green\u003c\/strong\u003e becomes useful when producing parts that must be easy to spot in workshop environments. Brackets, housings, mounts, and other functional components are common prints where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe bright lime color can be especially helpful during prototyping. Many users choose \u003cstrong\u003elime green abs filament\u003c\/strong\u003e when they want components that are clearly visible inside assemblies or when different design versions must be identified quickly.\u003c\/p\u003e \u003cp\u003eColor differentiation often helps keep complex projects organized and makes it easier to track printed parts during testing.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Reliable Printing\u003c\/h3\u003e \u003cp\u003eIn everyday FDM printing, stable extrusion is essential for achieving predictable results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth material flow through the extruder and supports consistent layer adhesion throughout the print.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains steady, printed objects tend to maintain their intended geometry more accurately. This becomes especially important when producing components that must align with other mechanical parts.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003elime green abs filament 1.75\u003c\/strong\u003e for prototypes, workshop tools, and functional parts.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Development\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool provides a convenient amount of material for experimenting with designs or producing smaller batches of parts. It allows makers to test prototypes and printing settings without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor design iterations, development work, and functional prints, this \u003cstrong\u003elime green abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Lime Green\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eABS has a huge number of uses. Among them are: housings for electronics, household appliances, car parts, medical equipment, children's toys, sports equipment, household products, pipes and fittings, and much more. In general, plastic is excellent for general modeling and prototyping in all areas of industry and design as well as for creating machine parts and mechanisms, where high mechanical strength is primarily required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABS Printing Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is important to prepare the table for printing by ensuring that the first layer adheres well, sometimes it will be difficult to avoid curled edges of the model. Anything that is on hand or recommended by 3D printing enthusiasts will do, from hairspray to masking tape. At the same time, you also need to carefully remove a well-adhered model - a good construction spatula helps. When printing, it is important to cover the printer or the printable area to prevent external influences. It is very important to eliminate drafts or airflow - they can impair adhesion, especially on large models. Also, for better print quality, it is better to print at a speed of no higher than 50-60 mm \/ s. This will give the layers a chance to stick together better. At the same time, it is also important to ensure the ventilation of the room or leave the room during the printing process - toxic substances that are harmful to humans are released during the melting of ABS. The recommended filling level of the model is 95-96%. At a higher filling, internal stress causes the part to warp and reduces dimensional accuracy. Post-processing is carried out with dichloromethane, acetone and other substances. This primarily smoothes the surface and adds gloss, although it can also improve adhesion.\u003c\/p\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47960503026004,"sku":"ABS-109100","price":22.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-lime_green-100.jpg?v=1765293950"},{"product_id":"abs-filament-1-75mm-blue-250g-100m","title":"ABS Blue 1,75mm 250g\/100m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eblue abs filament 1.75\u003c\/strong\u003e is intended for makers who prefer materials that behave predictably during printing. ABS has remained a common choice in FDM printing for years, especially when printed parts need durability and structural strength rather than purely decorative detail.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers that use the standard filament format.\u003c\/p\u003e \u003cp\u003eIn everyday printing, ABS is often used for objects that must stay stable during regular use or when parts are intended to become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eSuitable for Functional Prints and Prototypes\u003c\/h3\u003e \u003cp\u003eFor many workshops, \u003cstrong\u003eabs filament blue\u003c\/strong\u003e becomes a practical option when producing parts such as brackets, housings, mounts, or small mechanical components. ABS is commonly chosen for these applications because printed parts tend to remain solid and structurally stable.\u003c\/p\u003e \u003cp\u003eThe blue color can also be helpful during prototyping. Many makers use color differentiation to identify design revisions or to separate components within assemblies. Using \u003cstrong\u003eblue abs filament\u003c\/strong\u003e makes printed parts easier to distinguish from other materials or versions.\u003c\/p\u003e \u003cp\u003eBecause of this, \u003cstrong\u003eblue abs filament\u003c\/strong\u003e often appears in projects where both function and visual clarity are important.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion During Printing\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, material consistency has a strong influence on the final result. A stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain steady extrusion through the hotend and supports reliable layer bonding throughout the printing process.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains predictable, parts are more likely to keep their intended dimensions and structure. This is particularly noticeable when printing functional components that must fit together with other parts.\u003c\/p\u003e \u003cp\u003eFor this reason, many users rely on \u003cstrong\u003eblue abs filament 1.75\u003c\/strong\u003e for workshop tools, prototypes, and replacement components.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Development\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is convenient when testing new designs or producing smaller batches of parts. It allows makers to experiment with settings, prototypes, or mechanical components without committing to a full-size spool.\u003c\/p\u003e \u003cp\u003eFor experimentation, design iterations, and functional prints, this \u003cstrong\u003eblue abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eABS has a huge number of uses. Among them are: housings for electronics, household appliances, car parts, medical equipment, children's toys, sports equipment, household products, pipes and fittings, and much more. In general, plastic is excellent for general modeling and prototyping in all areas of industry and design as well as for creating machine parts and mechanisms, where high mechanical strength is primarily required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABS Printing Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is important to prepare the table for printing by ensuring that the first layer adheres well, sometimes it will be difficult to avoid curled edges of the model. Anything that is on hand or recommended by 3D printing enthusiasts will do, from hairspray to masking tape. At the same time, you also need to carefully remove a well-adhered model - a good construction spatula helps. When printing, it is important to cover the printer or the printable area to prevent external influences. It is very important to eliminate drafts or airflow - they can impair adhesion, especially on large models. Also, for better print quality, it is better to print at a speed of no higher than 50-60 mm \/ s. This will give the layers a chance to stick together better. At the same time, it is also important to ensure the ventilation of the room or leave the room during the printing process - toxic substances that are harmful to humans are released during the melting of ABS. The recommended filling level of the model is 95-96%. At a higher filling, internal stress causes the part to warp and reduces dimensional accuracy. Post-processing is carried out with dichloromethane, acetone and other substances. This primarily smoothes the surface and adds gloss, although it can also improve adhesion.\u003c\/p\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47960583602516,"sku":"ABS-107100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-blue-100_73c62b81-947c-4c61-a17a-e14b23f875f5.jpg?v=1765293821"},{"product_id":"abs-filament-1-75mm-orange-250g-100m","title":"ABS Orange 1,75mm 250g\/100m","description":"\u003ch3\u003eA Bright ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eorange abs filament 1.75\u003c\/strong\u003e is intended for makers who want a dependable material that also stands out visually during printing and assembly. ABS has remained a widely used plastic in FDM printing because it offers durability and stable printing behavior when producing functional parts.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits most desktop FDM printers designed for the standard filament format.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often chosen for parts that must remain structurally stable during regular use or when printed components become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Color That Makes Parts Easy to Identify\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament orange\u003c\/strong\u003e becomes useful when producing parts that need to be clearly visible during prototyping or workshop use. Brackets, housings, mounts, and other functional components are typical prints where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe orange color can be especially helpful in projects where printed components need to stand out from surrounding parts. Many users choose \u003cstrong\u003eorange abs filament\u003c\/strong\u003e when they want to quickly identify certain elements inside assemblies or distinguish different versions of a design.\u003c\/p\u003e \u003cp\u003eColor differentiation can also help keep complex printing projects organized during development.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Reliable Results\u003c\/h3\u003e \u003cp\u003eIn everyday printing workflows, stable extrusion helps maintain predictable results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e supports smooth material flow through the hotend and contributes to steady layer adhesion throughout the print.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains consistent, printed parts tend to maintain their intended geometry more accurately. This becomes especially important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003eorange abs filament 1.75\u003c\/strong\u003e when printing workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Development\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool provides a convenient amount of filament for experimenting with new designs or producing smaller batches of parts. It allows makers to test printing settings and prototype components without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work, design iterations, and functional prints, this \u003cstrong\u003eorange abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Orange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eABS has a huge number of uses. Among them are: housings for electronics, household appliances, car parts, medical equipment, children's toys, sports equipment, household products, pipes and fittings, and much more. In general, plastic is excellent for general modeling and prototyping in all areas of industry and design as well as for creating machine parts and mechanisms, where high mechanical strength is primarily required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABS Printing Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is important to prepare the table for printing by ensuring that the first layer adheres well, sometimes it will be difficult to avoid curled edges of the model. Anything that is on hand or recommended by 3D printing enthusiasts will do, from hairspray to masking tape. At the same time, you also need to carefully remove a well-adhered model - a good construction spatula helps. When printing, it is important to cover the printer or the printable area to prevent external influences. It is very important to eliminate drafts or airflow - they can impair adhesion, especially on large models. Also, for better print quality, it is better to print at a speed of no higher than 50-60 mm \/ s. This will give the layers a chance to stick together better. At the same time, it is also important to ensure the ventilation of the room or leave the room during the printing process - toxic substances that are harmful to humans are released during the melting of ABS. The recommended filling level of the model is 95-96%. At a higher filling, internal stress causes the part to warp and reduces dimensional accuracy. Post-processing is carried out with dichloromethane, acetone and other substances. This primarily smoothes the surface and adds gloss, although it can also improve adhesion.\u003c\/p\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47961124569428,"sku":"ABS-104100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-orange-100_98e7816b-6b28-49f0-8840-7f1f7abc7167.jpg?v=1765293690"},{"product_id":"abs-filament-1-75mm-gray-250g-100m","title":"ABS Gray 1,75mm 250g\/100m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003egrey abs filament 1.75\u003c\/strong\u003e is intended for makers who prefer reliable materials for everyday printing. ABS has long been a common choice in FDM printing because it offers durability and predictable behavior when producing functional parts.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers that use the standard filament format.\u003c\/p\u003e \u003cp\u003eIn many workshops, ABS is used when printed parts need to remain structurally stable and suitable for practical use.\u003c\/p\u003e \u003ch3\u003eA Neutral Color for Functional Prints\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament grey\u003c\/strong\u003e becomes a convenient option when producing mechanical components or prototype parts. Brackets, housings, mounts, and other functional elements are typical examples where ABS is often used.\u003c\/p\u003e \u003cp\u003eThe grey color offers a neutral appearance that works well in technical prints. Many users choose \u003cstrong\u003egrey abs filament\u003c\/strong\u003e when they want parts that visually resemble industrial components or blend naturally with machines and mechanical assemblies.\u003c\/p\u003e \u003cp\u003eDuring development work, neutral filament colors can also help highlight surface details and geometry in printed parts.\u003c\/p\u003e \u003ch3\u003eStable Extrusion and Reliable Results\u003c\/h3\u003e \u003cp\u003eIn regular printing workflows, predictable extrusion plays an important role in achieving consistent results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain steady material flow through the extruder and supports reliable layer bonding during printing.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains stable, printed parts are more likely to maintain their intended shape and fit accurately with other components.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003egrey abs filament 1.75\u003c\/strong\u003e for workshop accessories, mechanical prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Development\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is convenient when experimenting with new designs or printing smaller batches of parts. It provides enough material for prototypes and design iterations without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work and functional prints, this \u003cstrong\u003egrey abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Gray\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47961802178900,"sku":"ABS-115100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-gray-100_08af68b2-a7b7-454c-8d4f-1a802ccebdc5.jpg?v=1765293469"},{"product_id":"abs-filament-1-75mm-green-250g-100m","title":"ABS Green 1,75mm 250g\/100m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003egreen abs filament 1.75\u003c\/strong\u003e is intended for makers who need a reliable material for regular 3D printing projects. ABS has long been used in FDM printing because it combines durability with predictable printing behavior, making it suitable for functional parts and workshop components.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers that use the standard filament format.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is commonly used when printed objects need to remain structurally stable during everyday use or when parts are designed to become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Color That Stands Out in Prototyping\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament green\u003c\/strong\u003e becomes useful when printing components that need to be clearly visible during testing or assembly. Brackets, housings, mounts, and small mechanical parts are typical prints where ABS performs well.\u003c\/p\u003e \u003cp\u003eThe green color can be especially helpful in workshop environments. Many users choose \u003cstrong\u003egreen abs filament\u003c\/strong\u003e when they want to quickly identify specific components or distinguish different versions of a prototype.\u003c\/p\u003e \u003cp\u003eDuring development work, color-coded parts often make it easier to organize printed components and track design changes.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion and Reliable Results\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, predictable extrusion plays a major role in producing dependable results. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth material flow through the extruder and supports stable layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains steady, printed parts tend to maintain their intended shape and dimensions more accurately. This is particularly important when producing functional components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many users rely on \u003cstrong\u003egreen abs filament 1.75\u003c\/strong\u003e for workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Development and Testing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is convenient when experimenting with new designs or producing smaller batches of parts. It allows makers to test prototypes and printing settings without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor design iterations, functional prints, and small workshop projects, this \u003cstrong\u003egreen abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Green\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47961818038612,"sku":"ABS-106100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-green-100_ee243e57-e981-4a68-ac4a-2168a94d897d.jpg?v=1765293394"},{"product_id":"abs-filament-1-75mm-yellow-250g-100m","title":"ABS Yellow 1,75mm 250g\/100m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eABS is still one of the materials many makers reach for when printing parts that need to be practical and durable. This \u003cstrong\u003eyellow abs filament 1.75\u003c\/strong\u003e follows that same idea — a familiar material, standard diameter, and a color that stands out when needed.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e100 meters\u003c\/strong\u003e in length. With a \u003cstrong\u003e1.75 mm diameter\u003c\/strong\u003e, it fits most FDM printers that use standard filament sizes.\u003c\/p\u003e \u003cp\u003eABS is commonly used for parts such as brackets, housings, mounts, and other components that need to hold their shape during regular use.\u003c\/p\u003e \u003ch3\u003eA Color That’s Easy to Spot\u003c\/h3\u003e \u003cp\u003eSome prints benefit from being clearly visible. \u003cstrong\u003eAbs filament yellow\u003c\/strong\u003e is often chosen for that exact reason.\u003c\/p\u003e \u003cp\u003eBright colors can help identify parts more quickly on the workbench or inside assemblies. Many makers use \u003cstrong\u003eyellow abs filament\u003c\/strong\u003e when printing prototypes or components that need to be easy to distinguish from other parts.\u003c\/p\u003e \u003cp\u003eThe color can also make it simpler to see surface details or small features after printing.\u003c\/p\u003e \u003ch3\u003ePredictable Printing Behavior\u003c\/h3\u003e \u003cp\u003eConsistent material flow plays a major role in reliable FDM printing. A stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth extrusion through the hotend and supports steady layer adhesion throughout the print.\u003c\/p\u003e \u003cp\u003eWhen filament feeds evenly, printed parts tend to maintain their intended geometry more accurately. This becomes especially important when parts need to align with other mechanical components.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003eyellow abs filament 1.75\u003c\/strong\u003e is often used for workshop tools, prototypes, and functional replacement parts.\u003c\/p\u003e \u003ch3\u003eA Compact Spool for Testing and Small Runs\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g spool\u003c\/strong\u003e is convenient for experimenting with designs or producing smaller batches of parts. It gives makers enough material for multiple prints without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work and everyday workshop printing, this \u003cstrong\u003eyellow abs filament 1.75\u003c\/strong\u003e offers a practical material for regular FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Yellow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47961837470036,"sku":"ABS-103100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-yellow-100.jpg?v=1765293281"},{"product_id":"abs-filament-1-75mm-white-250g-100m","title":"ABS White 1,75mm 250g\/100m","description":"\u003ch3\u003eA Simple, Reliable Material for Everyday Printing\u003c\/h3\u003e \u003cp\u003eABS has been part of desktop 3D printing for a long time, mostly because it behaves in a predictable way when producing functional parts. This \u003cstrong\u003ewhite abs filament 1.75\u003c\/strong\u003e follows the same principle — a familiar material, a standard diameter, and a neutral color that works in many types of projects.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g of filament\u003c\/strong\u003e, which corresponds to roughly \u003cstrong\u003e100 meters\u003c\/strong\u003e in length. With a \u003cstrong\u003e1.75 mm diameter\u003c\/strong\u003e, the filament is compatible with most FDM printers designed for standard filament sizes.\u003c\/p\u003e \u003cp\u003eFor many makers, ABS remains a practical option when parts need to stay dimensionally stable or when printed components will be used in mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Neutral Color That Works Almost Anywhere\u003c\/h3\u003e \u003cp\u003eColor choice sometimes matters less than people expect. In many workshop environments, a neutral tone simply makes projects easier to work with.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbs filament white\u003c\/strong\u003e is often used for prototypes, enclosures, brackets, and other functional parts where a clean, technical appearance is preferred. Many makers choose \u003cstrong\u003ewhite abs filament\u003c\/strong\u003e when they want printed objects that can easily be inspected, painted, or modified later.\u003c\/p\u003e \u003cp\u003eBecause the color is neutral, surface details and small features tend to be easier to notice during post-print inspection.\u003c\/p\u003e \u003ch3\u003eStable Extrusion for Reliable Results\u003c\/h3\u003e \u003cp\u003eSmooth extrusion is one of the things that helps prints come out consistently. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e supports steady material flow through the hotend and helps maintain reliable layer adhesion during the printing process.\u003c\/p\u003e \u003cp\u003eWhen the filament feeds evenly, printed components usually hold their intended geometry more accurately. That becomes especially important when parts must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003ewhite abs filament 1.75\u003c\/strong\u003e is commonly used for prototypes, workshop tools, and functional replacement parts.\u003c\/p\u003e \u003ch3\u003eA Compact Spool for Testing and Small Runs\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g spool\u003c\/strong\u003e offers a convenient amount of material for experimenting with new designs or printing smaller batches of parts. It allows makers to test settings or refine prototypes without committing to a large spool.\u003c\/p\u003e \u003cp\u003eFor everyday development work and practical prints, this \u003cstrong\u003ewhite abs filament 1.75\u003c\/strong\u003e provides a straightforward option for regular FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47961865519444,"sku":"ABS-102100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-white-100_2de90663-6ad9-43bf-9235-fa7aba006b8d.jpg?v=1765293088"},{"product_id":"abs-filament-1-75mm-brown-250g-100m","title":"ABS Brown 1,75mm 250g\/100m","description":"\u003ch3\u003eA Practical ABS Filament for Functional 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003ebrown abs filament 1.75\u003c\/strong\u003e is intended for makers who need a dependable material for everyday printing tasks. ABS has long been used in FDM printing because it provides a solid balance between durability and workable printing behavior.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits the standard configuration used by most desktop FDM printers.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often chosen when printed objects need to stay structurally stable during regular use or become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eWhere Brown ABS Is Commonly Used\u003c\/h3\u003e \u003cp\u003eFor many workshops, \u003cstrong\u003eabs filament brown\u003c\/strong\u003e becomes a useful option when producing practical components. Brackets, housings, mounts, and small mechanical elements are typical examples where ABS performs well.\u003c\/p\u003e \u003cp\u003eThe brown color offers a more neutral appearance compared with brighter filaments. Many makers choose \u003cstrong\u003ebrown abs filament\u003c\/strong\u003e when producing prototypes or parts that should visually blend with workshop tools, wood components, or mechanical assemblies.\u003c\/p\u003e \u003cp\u003eIn some projects, using brown filament also helps differentiate functional components from other printed parts during prototyping.\u003c\/p\u003e \u003ch3\u003eStable Extrusion in Everyday Printing\u003c\/h3\u003e \u003cp\u003eConsistent extrusion plays a major role in achieving reliable results in FDM printing. A stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth material flow through the extruder and supports dependable layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen the filament feeds evenly, printed parts tend to maintain their intended shape and dimensions more accurately. This is particularly important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of this, many users rely on \u003cstrong\u003ebrown abs filament 1.75\u003c\/strong\u003e when printing workshop accessories, mechanical prototypes, or replacement parts.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Development\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is convenient for experimenting with designs or producing smaller batches of parts. It provides enough material for several prototypes without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work, design iterations, or functional prints, this \u003cstrong\u003ebrown abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Brown\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47962100433236,"sku":"ABS-113100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-brown-100_29042ee7-36f6-455b-a4c5-b97ae6e510e1.jpg?v=1765293006"},{"product_id":"abs-filament-1-75mm-purple-250g-100m","title":"ABS Purple 1,75mm 250g\/100m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003epurple abs filament 1.75\u003c\/strong\u003e is designed for makers who want a dependable material with a distinctive color for regular 3D printing work. ABS has long been a widely used plastic in FDM printing because it combines durability with predictable printing behavior when producing functional components.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. The filament diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits most desktop FDM printers designed for standard filament sizes.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often selected for prints that must remain structurally stable during use or when printed components become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Distinct Color for Prototypes and Workshop Projects\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament purple\u003c\/strong\u003e becomes useful when producing parts that should be easy to identify in assemblies or during development. Brackets, housings, mounts, and small mechanical components are typical examples where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe purple color offers a strong visual presence without being overly bright. Many users choose \u003cstrong\u003epurple abs filament\u003c\/strong\u003e when they want printed components that stand out clearly while still maintaining a technical appearance.\u003c\/p\u003e \u003cp\u003eColor differentiation can also help organize prototype versions or separate specific parts within complex projects.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Reliable Results\u003c\/h3\u003e \u003cp\u003eIn everyday printing workflows, stable material flow plays a key role in achieving dependable results. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e supports smooth extrusion through the hotend and contributes to reliable layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains steady, printed parts tend to maintain their intended geometry more accurately. This becomes especially important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003epurple abs filament 1.75\u003c\/strong\u003e when printing workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Small Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool provides a convenient amount of filament for experimenting with new designs or producing smaller batches of parts. It allows makers to test printing settings and prototype components without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work and functional prints, this \u003cstrong\u003epurple abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Purple\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47962138739028,"sku":"ABS-112100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-purple-100_ee4ef1a8-8daf-418d-afd7-07367fa88b48.jpg?v=1765292542"},{"product_id":"abs-filament-1-75mm-light-blue-250g-100m","title":"ABS Light Blue 1,75mm 250g\/100m","description":"\u003ch3\u003eA Reliable ABS Filament for Everyday 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003elight blue abs filament 1.75\u003c\/strong\u003e is designed for makers who want a dependable material for everyday FDM printing. ABS has remained a familiar choice in the 3D printing world because it provides a balance between durability and consistent extrusion behavior.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers that support the standard filament size.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often used for parts that must remain stable during use or when printed components become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Distinct Color for Prototyping and Design Work\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament light blue\u003c\/strong\u003e becomes useful when producing parts that should be easy to identify during assembly or testing. Brackets, housings, mounts, and various functional components are typical prints where ABS performs well.\u003c\/p\u003e \u003cp\u003eThe lighter blue color offers a softer appearance compared with darker technical filaments. Many users choose \u003cstrong\u003elight blue abs filament\u003c\/strong\u003e when they want prototypes that remain clearly visible while still maintaining a clean technical look.\u003c\/p\u003e \u003cp\u003eDuring development work, color variation can also help separate different design versions or groups of components within the same project.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Predictable Results\u003c\/h3\u003e \u003cp\u003eStable material flow is essential in everyday FDM printing. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain steady extrusion through the hotend and supports reliable layer adhesion throughout the printing process.\u003c\/p\u003e \u003cp\u003eWhen the filament feeds smoothly, printed parts tend to maintain their intended geometry and dimensions more accurately. This becomes especially important when producing components that must align with other mechanical parts.\u003c\/p\u003e \u003cp\u003eBecause of this, many makers rely on \u003cstrong\u003elight blue abs filament 1.75\u003c\/strong\u003e when printing prototypes, workshop accessories, or functional components.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Development and Testing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is convenient when testing new designs or producing smaller batches of parts. It allows makers to experiment with prototypes and printing settings without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor design iterations, functional prints, and development projects, this \u003cstrong\u003elight blue abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Light Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47962178978132,"sku":"ABS-116100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-light_blue-100.jpg?v=1765292436"},{"product_id":"abs-filament-1-75mm-natural-250g-100m","title":"ABS Natural 1,75mm 250g\/100m","description":"\u003ch3\u003eA Versatile ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003enatural abs filament 1.75\u003c\/strong\u003e is intended for makers who want a reliable material for everyday FDM printing. ABS has remained a common choice for many years because it combines durability with predictable behavior when producing functional parts and prototypes.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers that use the standard filament format.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often used for components that must remain structurally stable during use or when printed parts become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Neutral Look for Prototyping and Technical Prints\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament natural\u003c\/strong\u003e becomes useful when printing parts where a neutral appearance is preferred. Brackets, housings, mounts, and small mechanical components are typical examples where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe natural color provides a simple, understated look that works well for technical prints and early-stage prototypes. Many users choose \u003cstrong\u003enatural abs filament\u003c\/strong\u003e when they want printed components that can be easily inspected or modified during development.\u003c\/p\u003e \u003cp\u003eBecause the color is neutral, it can also make surface details and structural features easier to see during testing.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Reliable Results\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, steady material flow is important for maintaining reliable results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps support smooth extrusion through the hotend and contributes to consistent layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains stable, printed parts tend to keep their intended shape and dimensions more accurately. This becomes particularly important when printing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003enatural abs filament 1.75\u003c\/strong\u003e when producing prototypes, workshop accessories, and replacement parts.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Development\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is convenient when experimenting with designs or producing smaller batches of parts. It allows makers to test printing settings and prototype components without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work and functional prints, this \u003cstrong\u003enatural abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Natural\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47962277511508,"sku":"ABS-101100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-natural-100_a7d62105-deec-4b58-a8dd-78c2a25d8702.jpg?v=1765292356"},{"product_id":"abs-filament-1-75mm-pink-250g-100m","title":"ABS Pink 1,75mm 250g\/100m","description":"\u003ch3\u003eA Bright ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003epink abs filament 1.75\u003c\/strong\u003e is designed for makers who want a reliable material with a color that stands out during printing and assembly. ABS has remained a common choice in FDM printing because it combines durability with predictable behavior when producing functional parts.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers that use the standard filament format.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often selected for prints that must remain structurally stable during use or when printed components become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Distinct Color for Prototyping and Organization\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament pink\u003c\/strong\u003e becomes useful when producing parts that need to be clearly visible in workshop environments or during testing. Brackets, housings, mounts, and small mechanical components are typical prints where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe pink color provides a strong visual contrast compared with more neutral filaments. Many users choose \u003cstrong\u003epink abs filament\u003c\/strong\u003e when they want printed parts that are easy to identify or when multiple prototype versions need to be separated visually.\u003c\/p\u003e \u003cp\u003eColor differentiation can also help keep complex printing projects organized during development.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Reliable Results\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing workflows, stable extrusion is important for achieving dependable results. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e supports smooth material flow through the hotend and contributes to steady layer adhesion during the printing process.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains predictable, printed parts tend to maintain their intended geometry more accurately. This becomes particularly important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003epink abs filament 1.75\u003c\/strong\u003e when printing workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Testing and Development\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool provides a convenient amount of filament for experimenting with new designs or producing smaller batches of parts. It allows makers to test prototypes and printing settings without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work, design iterations, and functional prints, this \u003cstrong\u003epink abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Pink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47962331939156,"sku":"ABS-110100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-pink-100_32fdb21b-b134-4509-929d-cf3c23a77b30.jpg?v=1765292241"},{"product_id":"abs-filament-1-75mm-silver-250g-100m","title":"ABS Silver 1,75mm 250g\/100m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003esilver abs filament 1.75\u003c\/strong\u003e is intended for makers who need a reliable material for regular FDM printing. ABS has remained widely used in desktop 3D printing because it offers durability and predictable printing behavior when producing functional components.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop printers designed for the standard filament format.\u003c\/p\u003e \u003cp\u003eIn many workshops, ABS is chosen for parts that must remain structurally stable during use or when printed components become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Neutral Metallic Look for Technical Prints\u003c\/h3\u003e \u003cp\u003eFor some projects, color is less about decoration and more about practicality. \u003cstrong\u003eabs filament silver\u003c\/strong\u003e provides a clean, technical appearance that works well for prototypes, housings, brackets, and other mechanical parts.\u003c\/p\u003e \u003cp\u003eMany users choose \u003cstrong\u003esilver abs filament\u003c\/strong\u003e when they want printed components that resemble the look of metal parts or when a neutral color helps maintain a more technical aesthetic.\u003c\/p\u003e \u003cp\u003eIn practice, this can also help certain details stand out more clearly when inspecting printed surfaces.\u003c\/p\u003e \u003ch3\u003eStable Material Flow During Printing\u003c\/h3\u003e \u003cp\u003eReliable extrusion is essential when producing consistent results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth feeding through the hotend and supports steady layer adhesion throughout the print.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains stable, printed parts tend to maintain their intended geometry more accurately. This becomes particularly important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003esilver abs filament 1.75\u003c\/strong\u003e is often used for workshop tools, prototypes, and replacement components.\u003c\/p\u003e \u003ch3\u003eA Compact Spool for Testing and Small Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool provides a convenient amount of filament for experimenting with designs or producing smaller batches of parts. It allows makers to test printing settings and prototype components without committing to a larger spool.\u003c\/p\u003e \u003cp\u003eFor development work and functional prints, this \u003cstrong\u003esilver abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47962362741076,"sku":"ABS-114100","price":21.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-silver-100_5bdacab2-8852-47db-a358-9b4971154ff5.jpg?v=1765291698"},{"product_id":"abs-filament-1-75mm-maroon-750g-300m","title":"ABS Maroon 1,75mm 750g\/300m","description":"\u003ch3\u003eA Reliable ABS Filament for Everyday 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003emaroon abs filament 1.75\u003c\/strong\u003e is intended for makers who want a dependable material for everyday printing tasks. ABS remains a familiar choice in FDM printing because it provides durability and predictable behavior when producing functional components.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits most desktop FDM printers that use the standard filament format.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often selected for parts that must remain structurally stable during regular use or become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Deep Color for Functional Prints and Prototypes\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament maroon\u003c\/strong\u003e becomes a practical option when producing components such as brackets, housings, mounts, and other mechanical elements. These types of parts benefit from the strength and structural consistency that ABS provides.\u003c\/p\u003e \u003cp\u003eThe maroon color offers a deeper tone compared with standard bright filaments. Many users choose \u003cstrong\u003emaroon abs filament\u003c\/strong\u003e when they want printed components that remain visually distinct while still maintaining a technical appearance.\u003c\/p\u003e \u003cp\u003eColor variation can also be useful in development work, helping makers separate different parts or track multiple versions of a prototype.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion in Day-to-Day Printing\u003c\/h3\u003e \u003cp\u003eStable extrusion plays an important role in reliable FDM printing. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth material flow through the hotend and supports dependable layer adhesion throughout the printing process.\u003c\/p\u003e \u003cp\u003eWhen the filament feeds steadily, printed parts tend to maintain their intended geometry more accurately. This becomes especially important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003emaroon abs filament 1.75\u003c\/strong\u003e for workshop tools, functional prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Balanced Spool Size for Regular Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a practical amount of filament for ongoing printing work. It offers enough material for several functional prints while remaining manageable for regular projects.\u003c\/p\u003e \u003cp\u003eFor makers producing mechanical components, prototypes, or workshop accessories, this \u003cstrong\u003emaroon abs filament 1.75\u003c\/strong\u003e offers a dependable option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Maroon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976320041300,"sku":"ABS-111300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-maroon.jpg?v=1765290956"},{"product_id":"abs-filament-1-75mm-black-750g-300m","title":"ABS Black 1,75mm 750g\/300m","description":"\u003ch3\u003eA Reliable ABS Filament for Functional 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eblack abs filament 1.75\u003c\/strong\u003e is intended for makers who prefer dependable materials when printing functional objects. ABS has been widely used in FDM printing for years, especially for parts that need durability and structural stability rather than purely decorative detail.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which matches the standard configuration used by most desktop FDM printers.\u003c\/p\u003e \u003cp\u003eIn many workshops, ABS remains a familiar choice for everyday printing tasks where reliability and predictable behavior matter.\u003c\/p\u003e \u003ch3\u003eSuitable for Workshop Parts and Prototypes\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament black\u003c\/strong\u003e becomes the go-to material for producing practical components. Brackets, housings, mounts, and small mechanical elements are common examples where ABS is frequently used.\u003c\/p\u003e \u003cp\u003eThe black color also has a practical role in technical prints. Many users choose \u003cstrong\u003eblack abs filament\u003c\/strong\u003e when producing parts that visually integrate with machines, tools, or other workshop equipment.\u003c\/p\u003e \u003cp\u003eDuring product development, darker filament colors are often helpful for distinguishing functional components from experimental prints.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion in Day-to-Day Printing\u003c\/h3\u003e \u003cp\u003eIn regular printing workflows, stable extrusion plays a major role in achieving reliable results. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth material flow through the extruder and supports solid layer bonding throughout the printing process.\u003c\/p\u003e \u003cp\u003eThis becomes particularly important when printing parts that must maintain their geometry or align accurately with other components.\u003c\/p\u003e \u003cp\u003eBecause of that, many users rely on \u003cstrong\u003eblack abs filament 1.75\u003c\/strong\u003e for workshop tools, mechanical prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Balanced Spool Size for Regular Printing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a practical balance between material capacity and flexibility. It offers enough filament for functional prints while remaining manageable for routine printing cycles.\u003c\/p\u003e \u003cp\u003eFor makers producing durable components or testing mechanical designs, this \u003cstrong\u003eblack abs filament 1.75\u003c\/strong\u003e offers a straightforward option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976349466964,"sku":"ABS-108300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-black.jpg?v=1765290836"},{"product_id":"abs-filament-1-75mm-red-750g-300m","title":"ABS Red 1,75mm 750g\/300m","description":"\u003ch3\u003eA Solid Choice for Everyday FDM Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003ered abs filament 1.75\u003c\/strong\u003e is aimed at makers who want a dependable material for routine 3D printing tasks. ABS has been part of the FDM printing world for a long time, mainly because it offers a good balance between durability and predictable printing behavior.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The filament diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits the majority of desktop printers designed for standard filament sizes.\u003c\/p\u003e \u003cp\u003eIn many workshops, ABS is still used when printed parts must remain structurally stable or when components will become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Color That Helps Keep Projects Organized\u003c\/h3\u003e \u003cp\u003eSometimes color choice is about practicality rather than aesthetics. \u003cstrong\u003eabs filament red\u003c\/strong\u003e can make printed parts easier to spot during assembly or when sorting through different prototype versions.\u003c\/p\u003e \u003cp\u003eBrackets, housings, mounts, and other workshop components are typical prints where ABS performs well. Many users choose \u003cstrong\u003ered abs filament\u003c\/strong\u003e when they want certain parts to stand out clearly or when organizing multiple components on a workbench.\u003c\/p\u003e \u003cp\u003eIn practice, this can make it easier to track different pieces during testing or development.\u003c\/p\u003e \u003ch3\u003eReliable Extrusion During Printing\u003c\/h3\u003e \u003cp\u003eConsistent material flow is important for maintaining print reliability. A stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps ensure smooth extrusion through the hotend and supports steady layer adhesion throughout the printing process.\u003c\/p\u003e \u003cp\u003eWhen extrusion stays consistent, printed parts usually maintain their intended geometry more accurately. That becomes important when components need to align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003ered abs filament 1.75\u003c\/strong\u003e is frequently used for workshop tools, functional prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Practical Spool for Ongoing Work\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a comfortable amount of material for regular printing projects. It offers enough filament for several prints while remaining manageable in everyday use.\u003c\/p\u003e \u003cp\u003eFor makers producing mechanical parts, prototypes, or workshop accessories, this \u003cstrong\u003ered abs filament 1.75\u003c\/strong\u003e offers a dependable option for day-to-day FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Red\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976360706388,"sku":"ABS-105300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-red.jpg?v=1765290257"},{"product_id":"abs-filament-1-75mm-lime-green-750g-300m","title":"ABS Lime Green 1,75mm 750g\/300m","description":"\u003ch3\u003eBright ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003elime green abs filament 1.75\u003c\/strong\u003e is intended for makers who want a dependable material with a color that stands out in everyday printing. ABS has remained a widely used plastic in FDM printing because it combines durability with predictable behavior when producing functional parts.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers designed for standard filament sizes.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often used when printed objects need to remain structurally stable during regular use or when parts are designed to become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Color That Helps Organize Prototypes\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament lime green\u003c\/strong\u003e becomes useful when printing components that need to be easy to identify inside assemblies or workshop projects. Brackets, housings, mounts, and small mechanical parts are typical examples where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe lime green color can be especially helpful in prototyping environments. Many users choose \u003cstrong\u003elime green abs filament\u003c\/strong\u003e when they want printed components that stand out visually or when multiple versions of a design must be quickly distinguished.\u003c\/p\u003e \u003cp\u003eColor coding can also help keep projects organized, particularly when several parts are printed at the same time.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion in Daily Printing\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, stable material flow is important for producing predictable results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth extrusion through the hotend and supports consistent layer adhesion throughout the print.\u003c\/p\u003e \u003cp\u003eWhen the filament feeds steadily, printed parts tend to maintain their intended geometry more accurately. This becomes especially important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003elime green abs filament 1.75\u003c\/strong\u003e when producing workshop tools, functional prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Practical Spool Size for Regular Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a practical amount of material for ongoing printing work. It offers enough filament for multiple functional prints while remaining manageable for routine projects.\u003c\/p\u003e \u003cp\u003eFor makers printing mechanical parts, prototypes, or workshop accessories, this \u003cstrong\u003elime green abs filament 1.75\u003c\/strong\u003e offers a reliable option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Lime Green\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976411988308,"sku":"ABS-109300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-lime_green.jpg?v=1765289709"},{"product_id":"abs-filament-1-75mm-blue-750g-300m","title":"ABS Blue 1,75mm 750g\/300m","description":"\u003ch3\u003eA Reliable ABS Filament for Functional 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eblue abs filament 1.75\u003c\/strong\u003e is designed for makers who rely on consistent materials during everyday printing. ABS has remained a widely used plastic in FDM printing for many years, largely because it balances strength, durability, and predictable printing behavior.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits the standard setup used by most desktop FDM printers.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often chosen for prints that must handle regular use, especially when the goal is producing functional components rather than purely decorative objects.\u003c\/p\u003e \u003ch3\u003eWhere Blue ABS Is Often Used\u003c\/h3\u003e \u003cp\u003eFor many workshops, \u003cstrong\u003eabs filament blue\u003c\/strong\u003e becomes a practical material when producing parts such as brackets, housings, mounts, and other mechanical elements. These types of prints benefit from a material that maintains structural stability over time.\u003c\/p\u003e \u003cp\u003eThe blue color also plays a useful role during prototyping. Many makers rely on color differentiation to track design revisions or separate components within assemblies. Using \u003cstrong\u003eblue abs filament\u003c\/strong\u003e can make printed parts easier to identify during development work.\u003c\/p\u003e \u003cp\u003eBecause of this, \u003cstrong\u003eblue abs filament\u003c\/strong\u003e is often used in projects where visual clarity and functional performance go hand in hand.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Predictable Prints\u003c\/h3\u003e \u003cp\u003eStable extrusion is one of the most important aspects of reliable 3D printing. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain steady material flow through the extruder and supports consistent layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen the filament feeds smoothly, the printed part tends to keep its intended geometry more accurately. This becomes especially important when printing objects that must align with other components or mechanical parts.\u003c\/p\u003e \u003cp\u003eFor that reason, many makers rely on \u003cstrong\u003eblue abs filament 1.75\u003c\/strong\u003e when producing workshop tools, prototypes, or replacement parts.\u003c\/p\u003e \u003ch3\u003eA Practical Spool Size for Regular Printing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a balanced amount of material for ongoing projects. It offers enough filament for multiple functional prints while remaining manageable for regular printing cycles.\u003c\/p\u003e \u003cp\u003eFor makers who regularly produce mechanical components, prototypes, or workshop accessories, this \u003cstrong\u003eblue abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976430338388,"sku":"ABS-107300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-blue.jpg?v=1765289591"},{"product_id":"abs-filament-1-75mm-orange-750g-300m","title":"ABS Orange 1,75mm 750g\/300m","description":"\u003ch3\u003eA Reliable ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eorange abs filament 1.75\u003c\/strong\u003e is intended for makers who want a dependable material for regular 3D printing work. ABS has remained a familiar choice in FDM printing because it provides durability and consistent printing behavior when producing functional parts.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers designed for standard filament sizes.\u003c\/p\u003e \u003cp\u003eIn many workshops, ABS continues to be used for parts that must remain structurally stable during use or become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Color That Stands Out in Workshop Projects\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament orange\u003c\/strong\u003e becomes a useful option when producing parts that need to be easy to identify in assemblies or prototype builds. Brackets, housings, mounts, and other mechanical components are typical prints where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe orange color provides a bright and visible appearance. Many users choose \u003cstrong\u003eorange abs filament\u003c\/strong\u003e when they want printed parts that stand out clearly or when multiple prototype versions need to be distinguished quickly.\u003c\/p\u003e \u003cp\u003eColor coding can also make it easier to organize printed parts during development or testing.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Reliable Results\u003c\/h3\u003e \u003cp\u003eIn everyday printing workflows, stable material flow helps ensure dependable results. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e supports smooth extrusion through the hotend and contributes to reliable layer adhesion during the printing process.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains steady, printed parts tend to maintain their intended geometry more accurately. This becomes especially important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003eorange abs filament 1.75\u003c\/strong\u003e when printing workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eBalanced Spool Size for Regular Printing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool offers a practical amount of filament for ongoing projects. It provides enough material for multiple functional prints while remaining manageable during routine printing work.\u003c\/p\u003e \u003cp\u003eFor makers producing mechanical parts, prototypes, or workshop accessories, this \u003cstrong\u003eorange abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Orange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976452620628,"sku":"ABS-104300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-orange.jpg?v=1765289473"},{"product_id":"abs-filament-1-75mm-gray-750g-300m","title":"ABS Gray 1,75mm 750g\/300m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003egrey abs filament 1.75\u003c\/strong\u003e is intended for makers who prefer reliable materials for everyday printing tasks. ABS has remained a familiar choice in FDM printing for many years, particularly when printed parts need durability and structural stability.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which matches the standard configuration used by most desktop FDM printers.\u003c\/p\u003e \u003cp\u003eIn many workshops, ABS continues to be used for parts that must remain functional and structurally consistent during regular use.\u003c\/p\u003e \u003ch3\u003eA Neutral Color for Technical Prints\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament grey\u003c\/strong\u003e becomes a convenient option when producing mechanical parts or prototypes. Brackets, housings, mounts, and other structural elements are typical prints where ABS is often used.\u003c\/p\u003e \u003cp\u003eThe grey color provides a neutral, technical look that fits well with machines, tools, and workshop environments. Many users choose \u003cstrong\u003egrey abs filament\u003c\/strong\u003e when they want printed parts that resemble industrial components or blend visually into mechanical assemblies.\u003c\/p\u003e \u003cp\u003eDuring design work, neutral filament colors can also make it easier to evaluate the geometry and surface detail of printed parts.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion in Daily Printing\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, stable material flow is essential for achieving reliable results. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain steady extrusion through the hotend and supports dependable layer adhesion throughout the printing process.\u003c\/p\u003e \u003cp\u003eWhen the filament feeds smoothly, printed objects tend to maintain their intended geometry more accurately. This is particularly important when parts must align with other mechanical components.\u003c\/p\u003e \u003cp\u003eBecause of this, many users rely on \u003cstrong\u003egrey abs filament 1.75\u003c\/strong\u003e for workshop tools, functional prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eBalanced Spool Size for Regular Printing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a practical amount of material for ongoing projects. It offers enough filament for multiple functional prints while remaining manageable for regular printing cycles.\u003c\/p\u003e \u003cp\u003eFor makers producing mechanical components, workshop accessories, or prototypes, this \u003cstrong\u003egrey abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Gray\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976463368532,"sku":"ABS-115300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-gray.jpg?v=1765289350"},{"product_id":"abs-filament-1-75mm-green-750g-300m","title":"ABS Green 1,75mm 750g\/300m","description":"\u003ch3\u003eA Reliable ABS Filament for Functional 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003egreen abs filament 1.75\u003c\/strong\u003e is intended for makers who prefer materials that behave consistently during everyday printing. ABS has remained a widely used plastic in FDM printing because it offers durability and predictable results when producing functional parts.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits the standard configuration used by most desktop FDM printers.\u003c\/p\u003e \u003cp\u003eIn many workshops, ABS continues to be used for components that must remain structurally stable and suitable for practical use.\u003c\/p\u003e \u003ch3\u003eA Bright Color for Prototyping and Organization\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament green\u003c\/strong\u003e becomes a practical option when producing parts such as brackets, housings, mounts, or other mechanical components. These types of prints benefit from a material that maintains structural integrity across multiple layers.\u003c\/p\u003e \u003cp\u003eThe green color can also be useful during development work. Many users choose \u003cstrong\u003egreen abs filament\u003c\/strong\u003e when they want parts that are easy to identify inside assemblies or when different prototype versions need to be clearly distinguished.\u003c\/p\u003e \u003cp\u003eColor-coded parts often make it easier to organize complex projects or track design revisions during prototyping.\u003c\/p\u003e \u003ch3\u003eStable Extrusion for Predictable Printing\u003c\/h3\u003e \u003cp\u003eIn regular printing workflows, consistent material flow helps ensure reliable results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e supports smooth extrusion through the hotend and contributes to stable layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains steady, printed parts are more likely to retain their intended geometry and align properly with other components.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003egreen abs filament 1.75\u003c\/strong\u003e when printing workshop tools, functional prototypes, or replacement parts.\u003c\/p\u003e \u003ch3\u003eA Balanced Spool Size for Regular Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a practical amount of material for ongoing printing work. It offers enough filament for multiple functional prints while remaining manageable for routine projects.\u003c\/p\u003e \u003cp\u003eFor makers producing mechanical parts, workshop accessories, or prototypes, this \u003cstrong\u003egreen abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Green\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976470479188,"sku":"ABS-106300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-green.jpg?v=1765289126"},{"product_id":"abs-filament-1-75mm-yellow-750g-300m","title":"ABS Yellow 1,75mm 750g\/300m","description":"\u003ch3\u003eA Familiar Material for Practical Prints\u003c\/h3\u003e \u003cp\u003eABS remains a familiar material for many makers who print functional parts on FDM printers. This \u003cstrong\u003eyellow abs filament 1.75\u003c\/strong\u003e follows the same idea — reliable material, standard diameter, and a bright color that can be easy to work with in practical projects.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e300 meters\u003c\/strong\u003e. With a \u003cstrong\u003e1.75 mm diameter\u003c\/strong\u003e, it fits most desktop printers that use standard filament sizes.\u003c\/p\u003e \u003cp\u003eABS is commonly chosen for parts such as brackets, housings, mounts, and other mechanical components where dimensional stability matters.\u003c\/p\u003e \u003ch3\u003eA Bright Color for Workshop Prints\u003c\/h3\u003e \u003cp\u003eSometimes color helps more than people expect. \u003cstrong\u003eAbs filament yellow\u003c\/strong\u003e is often used when printed parts should be easy to notice on the workbench or inside assemblies.\u003c\/p\u003e \u003cp\u003eThe bright tone makes components stand out clearly. Many makers use \u003cstrong\u003eyellow abs filament\u003c\/strong\u003e when printing prototypes or small mechanical parts that need to be identified quickly during assembly or testing.\u003c\/p\u003e \u003cp\u003eIt can also help when checking printed surfaces or small details after a print finishes.\u003c\/p\u003e \u003ch3\u003eReliable Printing Behavior\u003c\/h3\u003e \u003cp\u003eOne reason people continue to use ABS is its predictable extrusion behavior. A stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth feeding through the hotend and supports consistent layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen material flow stays steady, printed objects tend to maintain their intended geometry more accurately. That becomes important when parts need to align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003eyellow abs filament 1.75\u003c\/strong\u003e is often used for workshop tools, functional prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Spool Size for Ongoing Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g spool\u003c\/strong\u003e offers a comfortable amount of material for regular printing work. It provides enough filament for multiple prints while still being easy to manage during day-to-day use.\u003c\/p\u003e \u003cp\u003eFor makers printing brackets, housings, prototypes, or general workshop components, this \u003cstrong\u003eyellow abs filament 1.75\u003c\/strong\u003e provides a practical material for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Yellow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976501838164,"sku":"ABS-103300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-yellow.jpg?v=1765288996"},{"product_id":"abs-filament-1-75mm-white-750g-300m","title":"ABS White 1,75mm 750g\/300m","description":"\u003ch3\u003eA Neutral Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eNot every filament needs to be flashy. In many workshops a neutral material is exactly what people look for, especially when printing functional parts. That’s where \u003cstrong\u003ewhite abs filament 1.75\u003c\/strong\u003e fits in — simple, familiar, and easy to work with.\u003c\/p\u003e \u003cp\u003eThis spool contains \u003cstrong\u003e750 g of ABS\u003c\/strong\u003e, which comes out to roughly \u003cstrong\u003e300 meters of filament\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, so it works with most FDM printers that use standard filament sizes.\u003c\/p\u003e \u003cp\u003eABS has been around in desktop printing for years. It’s commonly used when printed objects need to hold their shape or when parts become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Clean Look for Technical Prints\u003c\/h3\u003e \u003cp\u003eSome makers pick colors purely for aesthetics. Others prefer something more neutral.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbs filament white\u003c\/strong\u003e is often used for housings, brackets, simple enclosures, and other functional prints. The color keeps things visually clean and makes small surface details easier to inspect once the print finishes.\u003c\/p\u003e \u003cp\u003eMany people also choose \u003cstrong\u003ewhite abs filament\u003c\/strong\u003e when parts might be painted later or used as prototypes.\u003c\/p\u003e \u003ch3\u003ePrinting Behavior Makers Expect\u003c\/h3\u003e \u003cp\u003eOne thing people appreciate about ABS is predictable extrusion. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly through the hotend and supports steady layer bonding during printing.\u003c\/p\u003e \u003cp\u003eWhen material flow stays stable, prints tend to come out closer to their intended shape. That matters when parts need to fit together or align with other components.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003ewhite abs filament 1.75\u003c\/strong\u003e often ends up being used for workshop tools, replacement parts, and everyday prototypes.\u003c\/p\u003e \u003ch3\u003eEnough Material for Ongoing Prints\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g spool\u003c\/strong\u003e sits in a comfortable middle ground. There’s enough filament for several prints, but it’s still easy to handle on a regular basis.\u003c\/p\u003e \u003cp\u003eFor makers printing brackets, housings, or general workshop components, this \u003cstrong\u003ewhite abs filament 1.75\u003c\/strong\u003e is a practical material for day-to-day FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976514060628,"sku":"ABS-102300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-white.jpg?v=1765288885"},{"product_id":"abs-filament-1-75mm-brown-750g-300m","title":"ABS Brown 1,75mm 750g\/300m","description":"\u003ch3\u003eA Reliable ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003ebrown abs filament 1.75\u003c\/strong\u003e is intended for makers who need a dependable material for regular 3D printing work. ABS has been widely used in FDM printing for years because it provides a good balance between durability and predictable printing behavior.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the material fits most desktop FDM printers designed for standard filament sizes.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often selected for parts that must remain structurally stable during use or become part of functional assemblies.\u003c\/p\u003e \u003ch3\u003eA Practical Choice for Workshop Parts\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament brown\u003c\/strong\u003e becomes a useful material when printing components such as brackets, housings, mounts, or small mechanical parts. These types of prints benefit from a filament that can maintain structural consistency across multiple layers.\u003c\/p\u003e \u003cp\u003eThe brown color offers a neutral appearance that works well for prototypes or parts intended to visually blend with other materials. Many users choose \u003cstrong\u003ebrown abs filament\u003c\/strong\u003e when printing functional components used in workshop environments or mechanical assemblies.\u003c\/p\u003e \u003cp\u003eIn development work, color variation can also help distinguish specific parts or design versions within a project.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Predictable Results\u003c\/h3\u003e \u003cp\u003eStable material flow plays an important role in successful FDM printing. A consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth extrusion and reliable layer adhesion during the printing process.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains steady, printed parts are more likely to retain their intended geometry. This becomes especially important when parts must align with other mechanical components.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003ebrown abs filament 1.75\u003c\/strong\u003e when producing workshop tools, replacement parts, or mechanical prototypes.\u003c\/p\u003e \u003ch3\u003eBalanced Spool Size for Regular Printing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a convenient amount of filament for ongoing projects. It offers enough material for several functional prints while still remaining manageable during routine printing work.\u003c\/p\u003e \u003cp\u003eFor makers working on mechanical parts, prototypes, or workshop accessories, this \u003cstrong\u003ebrown abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Brown\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976525660500,"sku":"ABS-113300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-brown.jpg?v=1765288753"},{"product_id":"abs-filament-1-75mm-purple-750g-300m","title":"ABS Purple 1,75mm 750g\/300m","description":"\u003ch3\u003eA Dependable Material for Daily Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003epurple abs filament 1.75\u003c\/strong\u003e is intended for makers who prefer a familiar, reliable material for regular FDM printing. ABS has been used in desktop 3D printing for many years, largely because it behaves predictably when producing functional parts.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The filament diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits the majority of FDM printers designed for standard filament sizes.\u003c\/p\u003e \u003cp\u003eIn many workshops, ABS is still the go-to option when parts need to remain stable during everyday use or when printed components become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Color That Stands Out Without Being Overly Bright\u003c\/h3\u003e \u003cp\u003eFor some projects, color plays a practical role rather than just an aesthetic one. \u003cstrong\u003eabs filament purple\u003c\/strong\u003e can make printed components easier to identify in assemblies or during testing.\u003c\/p\u003e \u003cp\u003eThe tone is noticeable but not overly vivid. Many users choose \u003cstrong\u003epurple abs filament\u003c\/strong\u003e when they want parts that remain visually distinct without looking overly decorative.\u003c\/p\u003e \u003cp\u003eIn practice, this can be useful when organizing prototypes, separating design versions, or simply keeping different components easy to recognize on the workbench.\u003c\/p\u003e \u003ch3\u003eSteady Extrusion for Predictable Prints\u003c\/h3\u003e \u003cp\u003eConsistent extrusion is one of the things makers look for in a dependable material. A stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e supports smooth feeding through the hotend and helps maintain reliable layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen the filament flows evenly, printed parts tend to keep their intended geometry more accurately. That matters when parts must fit together or align with other mechanical components.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003epurple abs filament 1.75\u003c\/strong\u003e is often used for workshop tools, housings, brackets, and other practical prints.\u003c\/p\u003e \u003ch3\u003eA Practical Spool Size for Ongoing Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a comfortable balance between material quantity and manageability. It offers enough filament for several prints while remaining convenient for regular use.\u003c\/p\u003e \u003cp\u003eFor makers working on prototypes, workshop accessories, or mechanical parts, this \u003cstrong\u003epurple abs filament 1.75\u003c\/strong\u003e offers a dependable option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Purple\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976638710100,"sku":"ABS-112300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-purple.jpg?v=1765288643"},{"product_id":"abs-filament-1-75mm-light-blue-750g-300m","title":"ABS Light Blue 1,75mm 750g\/300m","description":"\u003ch3\u003eA Reliable ABS Filament for Everyday 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003elight blue abs filament 1.75\u003c\/strong\u003e is designed for makers who prefer materials that behave consistently during printing. ABS remains one of the familiar materials used in FDM printing, especially when printed parts need durability and structural stability.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers designed for the standard filament format.\u003c\/p\u003e \u003cp\u003eIn many workshops, ABS continues to be used for parts that must remain functional during regular use or become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Distinct Color for Prototyping and Visual Identification\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament light blue\u003c\/strong\u003e becomes useful when printing components that should be easy to recognize within assemblies or during testing. Brackets, housings, mounts, and various mechanical elements are common prints where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe light blue color provides a clean and clearly visible appearance. Many users choose \u003cstrong\u003elight blue abs filament\u003c\/strong\u003e when they want prototypes that stand out visually while still maintaining a technical look.\u003c\/p\u003e \u003cp\u003eColor differentiation can also help during development work by making it easier to organize components or track design revisions.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion in Daily Printing\u003c\/h3\u003e \u003cp\u003eIn everyday printing workflows, stable extrusion helps maintain reliable results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e supports smooth material flow through the extruder and contributes to steady layer adhesion throughout the printing process.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains consistent, printed parts tend to maintain their intended geometry more accurately. This becomes particularly important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003elight blue abs filament 1.75\u003c\/strong\u003e for workshop accessories, functional prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eBalanced Spool Size for Regular Printing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool offers a practical amount of filament for ongoing projects. It provides enough material for several functional prints while remaining manageable during regular printing work.\u003c\/p\u003e \u003cp\u003eFor makers producing prototypes, mechanical parts, or workshop tools, this \u003cstrong\u003elight blue abs filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Light Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976654504276,"sku":"ABS-116300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-light_blue.jpg?v=1765288469"},{"product_id":"abs-filament-1-75mm-natural-750g-300m","title":"ABS Natural 1,75mm 750g\/300m","description":"\u003ch3\u003eA Reliable ABS Filament for Functional 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003enatural abs filament 1.75\u003c\/strong\u003e is intended for makers who want a dependable material for everyday FDM printing. ABS has remained a widely used plastic for many years because it provides durability and predictable performance when printing functional parts and mechanical components.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the filament fits most desktop FDM printers that support the standard filament size.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often chosen for prints that must remain structurally stable during regular use or when components become part of larger assemblies.\u003c\/p\u003e \u003ch3\u003eA Neutral Appearance for Prototyping\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament natural\u003c\/strong\u003e becomes a useful option when producing parts that benefit from a neutral, understated color. Brackets, housings, mounts, and other functional components are typical examples where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe natural tone allows printed parts to maintain a simple technical look without strong color contrast. Many users choose \u003cstrong\u003enatural abs filament\u003c\/strong\u003e when they want prototypes that are easy to inspect or modify during development.\u003c\/p\u003e \u003cp\u003eBecause the color is subtle, surface details and printed geometry can often be easier to evaluate during testing.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion in Everyday Printing\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, stable material flow is essential for achieving reliable results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth extrusion through the hotend and supports consistent layer adhesion throughout the printing process.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains steady, printed parts tend to maintain their intended geometry more accurately. This becomes particularly important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003enatural abs filament 1.75\u003c\/strong\u003e when printing prototypes, workshop accessories, and replacement parts.\u003c\/p\u003e \u003ch3\u003eBalanced Spool Size for Regular Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a practical amount of filament for ongoing printing work. It offers enough material for multiple functional prints while remaining manageable during routine projects.\u003c\/p\u003e \u003cp\u003eFor makers producing mechanical parts, prototypes, or workshop tools, this \u003cstrong\u003enatural abs filament 1.75\u003c\/strong\u003e offers a dependable option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Natural\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976696217940,"sku":"ABS-101300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-natural.jpg?v=1765288342"},{"product_id":"abs-filament-1-75mm-pink-750g-300m","title":"ABS Pink 1,75mm 750g\/300m","description":"\u003ch3\u003eA Reliable ABS Filament for Everyday 3D Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003epink abs filament 1.75\u003c\/strong\u003e is intended for makers who want a dependable material for regular printing projects. ABS has remained widely used in FDM printing because it provides durability and stable printing behavior when producing functional components.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits most desktop FDM printers designed for the standard filament format.\u003c\/p\u003e \u003cp\u003eIn practice, ABS is often chosen for parts that must remain structurally stable during regular use or when printed components become part of mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eA Color That Makes Parts Easy to Recognize\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament pink\u003c\/strong\u003e becomes a practical option when producing parts that need to stand out visually in workshop projects or prototype assemblies. Brackets, housings, mounts, and other mechanical elements are typical prints where ABS performs reliably.\u003c\/p\u003e \u003cp\u003eThe pink color provides strong visual contrast compared with neutral tones. Many users choose \u003cstrong\u003epink abs filament\u003c\/strong\u003e when they want printed parts that are easy to identify during assembly or when multiple design versions need to be clearly separated.\u003c\/p\u003e \u003cp\u003eUsing different colors can also help keep complex projects organized during development and testing.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Reliable Results\u003c\/h3\u003e \u003cp\u003eIn everyday printing workflows, stable extrusion helps maintain predictable results. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e supports smooth material flow through the hotend and contributes to reliable layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains consistent, printed parts tend to maintain their intended geometry more accurately. This becomes especially important when producing components that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, many makers rely on \u003cstrong\u003epink abs filament 1.75\u003c\/strong\u003e for workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eBalanced Spool Size for Regular Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool provides a practical amount of filament for ongoing printing work. It offers enough material for multiple functional prints while remaining manageable for routine projects.\u003c\/p\u003e \u003cp\u003eFor makers producing mechanical parts, prototypes, or workshop accessories, this \u003cstrong\u003epink abs filament 1.75\u003c\/strong\u003e offers a dependable option for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Pink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976715026772,"sku":"ABS-110300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-pink_5fefd874-2b74-4c82-ba39-fdac4c82a24e.jpg?v=1765288259"},{"product_id":"abs-filament-1-75mm-silver-750g-300m","title":"ABS Silver 1,75mm 750g\/300m","description":"\u003ch3\u003eWorking with ABS in Everyday Printing\u003c\/h3\u003e \u003cp\u003eWorking with ABS is still a common choice for many makers who print functional parts on FDM printers. This \u003cstrong\u003esilver abs filament 1.75\u003c\/strong\u003e follows that same idea: a familiar material, a neutral color, and a format that fits standard desktop printers.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g of filament\u003c\/strong\u003e, which is roughly \u003cstrong\u003e300 meters\u003c\/strong\u003e in length. With a \u003cstrong\u003e1.75 mm diameter\u003c\/strong\u003e, the filament is compatible with most printers designed for standard extrusion systems.\u003c\/p\u003e \u003cp\u003eFor everyday printing tasks—brackets, housings, simple mechanical components—ABS is often chosen because parts tend to keep their shape well once printed.\u003c\/p\u003e \u003ch3\u003eA Neutral Color That Fits Technical Projects\u003c\/h3\u003e \u003cp\u003eSome colors are used purely for aesthetics. Silver usually isn’t one of them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbs filament silver\u003c\/strong\u003e is often picked because it blends naturally with technical parts and prototype assemblies. The tone is neutral, slightly industrial in appearance, and many makers find it useful when printed components need to look closer to metal hardware.\u003c\/p\u003e \u003cp\u003eThat’s why \u003cstrong\u003esilver abs filament\u003c\/strong\u003e often appears in workshop prints like mounts, enclosures, or replacement parts.\u003c\/p\u003e \u003ch3\u003ePrinting Behavior That Makers Expect From ABS\u003c\/h3\u003e \u003cp\u003eMaterial flow matters when the goal is repeatable prints. A stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain consistent extrusion through the hotend and supports steady layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eWhen the filament feeds smoothly, parts usually come out closer to their intended geometry. This becomes particularly noticeable when printing pieces that must align with other mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003esilver abs filament 1.75\u003c\/strong\u003e is frequently used for functional prototypes, tool holders, and workshop accessories.\u003c\/p\u003e \u003ch3\u003eA Spool Size That Works for Regular Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g spool\u003c\/strong\u003e offers enough filament for several prints without being overly bulky. For many makers it’s a comfortable size for routine printing work.\u003c\/p\u003e \u003cp\u003eWhether the goal is prototyping, small mechanical builds, or practical workshop prints, this \u003cstrong\u003esilver abs filament 1.75\u003c\/strong\u003e provides a straightforward material for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":47976731935060,"sku":"ABS-114300","price":59.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-300-silver.jpg?v=1765287608"},{"product_id":"abs-silver-1-75mm-1kg-400m","title":"ABS Silver 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament with a Clean Finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSilver abs filament 1.75\u003c\/strong\u003e is often chosen when you want printed parts to look a bit more refined without changing how they perform. The color gives a subtle metallic-style appearance.\u003c\/p\u003e \u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, so it fits most standard FDM printers.\u003c\/p\u003e \u003cp\u003eABS is commonly used for brackets, housings, mounts, and other functional parts that need to remain stable during use.\u003c\/p\u003e \u003ch3\u003eA Clean, Technical Look\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eAbs filament silver\u003c\/strong\u003e gives printed parts a more finished appearance. Many makers use \u003cstrong\u003esilver abs filament\u003c\/strong\u003e for prototypes and functional parts where visual presentation matters.\u003c\/p\u003e \u003ch3\u003ePrinting in Practice\u003c\/h3\u003e \u003cp\u003eA consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly and keeps extrusion stable. When material flow remains even, printed parts tend to maintain their intended geometry.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003esilver abs filament 1.75\u003c\/strong\u003e is often used for workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Full Spool for Ongoing Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough material for multiple prints without frequent changes.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53191643267412,"sku":"ABS-114400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-silver.jpg?v=1765295088"},{"product_id":"abs-pink-1-75mm-1kg-400m","title":"ABS Pink 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePink abs filament 1.75\u003c\/strong\u003e is often chosen when printed parts should be easy to recognize among other components. The color is bright enough to stand out, which can make it easier to organize different prototypes or project parts on the workbench.\u003c\/p\u003e\n\n\u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e of material. The filament diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the standard size used by most FDM printers.\u003c\/p\u003e\n\n\u003cp\u003eABS has long been used in 3D printing for functional objects that need reliable structure. Brackets, housings, mounts, and workshop accessories are common examples of parts printed with this material.\u003c\/p\u003e\n\n\u003ch3\u003eA Distinctive Color\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAbs filament pink\u003c\/strong\u003e makes printed objects easy to distinguish from other components or earlier prototype versions. Many makers use \u003cstrong\u003epink abs filament\u003c\/strong\u003e when working with prototypes or test prints.\u003c\/p\u003e\n\n\u003ch3\u003ePrinting Characteristics\u003c\/h3\u003e\n\u003cp\u003eA consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly through the hotend and supports steady layer adhesion during printing. When extrusion remains stable, printed parts tend to maintain their intended geometry.\u003c\/p\u003e\n\n\u003cp\u003eBecause of that, \u003cstrong\u003epink abs filament 1.75\u003c\/strong\u003e is frequently used for prototypes, workshop tools, and replacement parts.\u003c\/p\u003e\n\n\u003ch3\u003eSpool Size\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough filament for several prints or longer projects without frequent material changes.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Pink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53191710277972,"sku":"ABS-110400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-pink.jpg?v=1765296051"},{"product_id":"abs-natural-1-75mm-1g-400m","title":"ABS Natural 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament for Functional Printing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNatural abs filament 1.75\u003c\/strong\u003e is often chosen when the focus is on functionality rather than color. The natural tone comes directly from the base material, which gives printed parts a simple and technical look.\u003c\/p\u003e\n\n\u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the standard size used by most desktop FDM printers.\u003c\/p\u003e\n\n\u003cp\u003eABS has long been used in 3D printing for parts that need to remain stable and durable during everyday use. Brackets, housings, mounts, and workshop tools are typical examples.\u003c\/p\u003e\n\n\u003ch3\u003eA Neutral Material Color\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAbs filament natural\u003c\/strong\u003e has a slightly translucent appearance compared to most colored filaments. Many makers choose \u003cstrong\u003enatural abs filament\u003c\/strong\u003e for prototypes or technical prints where a neutral look is preferred.\u003c\/p\u003e\n\n\u003ch3\u003eStable Printing Behavior\u003c\/h3\u003e\n\u003cp\u003eA consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly through the hotend and supports steady layer adhesion during printing. When the extrusion remains stable, printed parts usually maintain their intended geometry.\u003c\/p\u003e\n\n\u003cp\u003eBecause of that, \u003cstrong\u003enatural abs filament 1.75\u003c\/strong\u003e is often used for prototypes, workshop tools, and replacement parts.\u003c\/p\u003e\n\n\u003ch3\u003eSpool Size\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough filament for multiple prints and longer projects without frequent material changes.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Natural\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53191786037588,"sku":"ABS-101400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-natural.jpg?v=1765297586"},{"product_id":"abs-light-blue-1-75mm-1kg-400m","title":"ABS Light Blue 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLight blue abs filament 1.75\u003c\/strong\u003e is often chosen when a project needs something practical but still easy to identify among other printed parts. The color is bright enough to be visible on the workbench, yet neutral enough to work well for prototypes or mechanical components.\u003c\/p\u003e\n\n\u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e of material. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, a standard size used by most FDM printers.\u003c\/p\u003e\n\n\u003cp\u003eABS has been used in desktop 3D printing for many years. Makers usually choose it for parts that need a bit more durability than basic materials. Brackets, enclosures, holders, and workshop accessories are typical examples.\u003c\/p\u003e\n\n\u003ch3\u003eA Color That Helps During Assembly\u003c\/h3\u003e\n\u003cp\u003eIn real projects color sometimes matters more than expected. \u003cstrong\u003eAbs filament light blue\u003c\/strong\u003e is easy to spot when several printed parts are lying on the table. That alone can make assembly or testing faster.\u003c\/p\u003e\n\n\u003cp\u003eMany people use \u003cstrong\u003elight blue abs filament\u003c\/strong\u003e when they want prototypes that are clearly visible but not too bright or distracting. The lighter tone also helps reveal edges and small surface details once a print is finished.\u003c\/p\u003e\n\n\u003ch3\u003eConsistent Printing Behavior\u003c\/h3\u003e\n\u003cp\u003eWhen printing functional parts, steady material flow becomes important. A stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly through the hotend and helps maintain even layer bonding during printing.\u003c\/p\u003e\n\n\u003cp\u003eIf extrusion stays consistent, printed components usually keep their intended shape more accurately. That becomes especially useful when parts must align with other printed elements or mechanical hardware.\u003c\/p\u003e\n\n\u003cp\u003eBecause of that, \u003cstrong\u003elight blue abs filament 1.75\u003c\/strong\u003e is often used for prototypes, workshop tools, and replacement parts.\u003c\/p\u003e\n\n\u003ch3\u003eEnough Material for Larger Projects\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough filament for longer prints or several projects in a row. That makes it a convenient option for makers who print regularly.\u003c\/p\u003e\n\n\u003cp\u003eFor everyday FDM printing, this \u003cstrong\u003elight blue abs filament 1.75\u003c\/strong\u003e offers a familiar and dependable material for functional parts and prototype work.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Light Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53191820607828,"sku":"ABS-116400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-lightblue.jpg?v=1765297986"},{"product_id":"abs-purple-1-75mm-1kg-400m","title":"ABS Purple 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003ePurple abs filament 1.75\u003c\/strong\u003e is usually chosen when you want printed parts to stand out without being too bright. The color makes it easier to distinguish components during a project.\u003c\/p\u003e \u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, so it fits most FDM printers without adjustments.\u003c\/p\u003e \u003cp\u003eABS is commonly used for brackets, housings, mounts, and other functional parts that need to stay stable during use.\u003c\/p\u003e \u003ch3\u003eA Color That’s Easy to Recognize\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eAbs filament purple\u003c\/strong\u003e makes printed parts easy to identify. Many makers use \u003cstrong\u003epurple abs filament\u003c\/strong\u003e for prototypes and design variations.\u003c\/p\u003e \u003ch3\u003ePrinting in Practice\u003c\/h3\u003e \u003cp\u003eA consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly and keeps extrusion stable. When flow remains even, printed parts tend to maintain their intended geometry.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003epurple abs filament 1.75\u003c\/strong\u003e is often used for workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Full Spool for Regular Use\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough material for multiple prints without frequent filament changes.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Purple\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53197687750996,"sku":"ABS-112400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-purple.jpg?v=1765374664"},{"product_id":"abs-brown-1-75mm-1kg-400m","title":"ABS Brown 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical Brown ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003ebrown abs filament 1.75\u003c\/strong\u003e is intended for makers who prefer dependable materials for regular 3D printing. ABS has long been a familiar plastic in the FDM printing world, often chosen for parts that need strength and durability rather than purely decorative qualities.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e1 kg\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e400 m\u003c\/strong\u003e. With a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the material fits standard desktop FDM printers and typical extrusion systems used in home workshops and professional prototyping environments.\u003c\/p\u003e \u003ch3\u003eReliable Material for Functional Parts\u003c\/h3\u003e \u003cp\u003eOne reason many users keep ABS on hand is its ability to produce sturdy parts that hold their structure during everyday use. This \u003cstrong\u003eabs filament brown\u003c\/strong\u003e works well for printing brackets, housings, small mechanical components, and workshop tools where structural stability matters.\u003c\/p\u003e \u003cp\u003eThe brown color brings a different visual character compared to more common bright filaments. In practice, \u003cstrong\u003ebrown abs filament\u003c\/strong\u003e is often used for prototypes, fixtures, or design concepts where a neutral tone helps parts blend into mechanical assemblies or workshop environments.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion for Predictable Results\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, material consistency plays a major role in achieving reliable results. A stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain steady extrusion and supports solid layer adhesion during printing.\u003c\/p\u003e \u003cp\u003eThat matters especially when printing functional objects or larger parts where dimensional stability becomes important. When the filament feeds smoothly through the extruder, it reduces interruptions and helps maintain a predictable printing process.\u003c\/p\u003e \u003ch3\u003eA Familiar Choice for Workshop Prototyping\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003eabs filament brown\u003c\/strong\u003e becomes a dependable option when producing working prototypes or replacement parts. ABS is commonly used for mechanical prints because the material remains workable during post-processing.\u003c\/p\u003e \u003cp\u003ePrinted components can be drilled, sanded, or adjusted when refining prototypes. When the goal is practical, durable prints with a neutral color, this \u003cstrong\u003ebrown abs filament 1.75\u003c\/strong\u003e offers a straightforward option for everyday FDM printing projects.\u003c\/p\u003e\u003cp data-start=\"2326\" data-end=\"2568\"\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Brown\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53197740933460,"sku":"ABS-113400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-brown_5a610b1e-7c1f-4f76-b1cd-a866ae52cda1.jpg?v=1765374998"},{"product_id":"abs-white-1-75mm-1kg-400m","title":"ABS White 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament with a Clean Finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eWhite abs filament 1.75\u003c\/strong\u003e is usually the go-to when you need a clean, neutral base for your prints. It works well for prototypes and parts that may be finished later.\u003c\/p\u003e \u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, so it works with most standard FDM printers.\u003c\/p\u003e \u003cp\u003eABS is commonly used for brackets, housings, mounts, and other functional parts that need to stay stable during use.\u003c\/p\u003e \u003ch3\u003eA Neutral Look That Works Everywhere\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eAbs filament white\u003c\/strong\u003e gives printed parts a simple and clean appearance. Many makers choose \u003cstrong\u003ewhite abs filament\u003c\/strong\u003e when they want to clearly see details or prepare parts for finishing.\u003c\/p\u003e \u003ch3\u003ePrinting in Practice\u003c\/h3\u003e \u003cp\u003eA stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly and helps maintain steady extrusion. When flow remains even, printed parts tend to maintain their intended geometry.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003ewhite abs filament 1.75\u003c\/strong\u003e is often used for prototypes, workshop tools, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Full Spool for Regular Printing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough material for multiple prints without frequent filament changes.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53197803848020,"sku":"ABS-102400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-white.jpg?v=1765375288"},{"product_id":"abs-yellow-1-75mm-1kg-400m","title":"ABS Yellow 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eYellow abs filament 1.75\u003c\/strong\u003e is often chosen when visibility becomes part of the workflow. The bright color makes it easier to track printed parts during a project.\u003c\/p\u003e \u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, so it works with most standard FDM printers.\u003c\/p\u003e \u003cp\u003eABS is commonly used for brackets, housings, mounts, and other functional parts that need to stay stable during use.\u003c\/p\u003e \u003ch3\u003eA Color That Helps You Stay Oriented\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eAbs filament yellow\u003c\/strong\u003e makes printed parts easy to locate on a workbench. Many makers use \u003cstrong\u003eyellow abs filament\u003c\/strong\u003e for prototypes and test prints.\u003c\/p\u003e \u003ch3\u003ePrinting in Practice\u003c\/h3\u003e \u003cp\u003eA stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly and helps maintain steady extrusion. When flow remains even, printed parts tend to keep their intended geometry.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003eyellow abs filament 1.75\u003c\/strong\u003e is often used for workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Full Spool for Regular Work\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough material for multiple prints without frequent changes.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Yellow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53198230749524,"sku":"ABS-103400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-yellow_5c70fc55-60b7-4e35-a608-c3938f44fbb7.jpg?v=1765376410"},{"product_id":"abs-green-1-75mm-1kg-400m","title":"ABS Green 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGreen abs filament 1.75\u003c\/strong\u003e is a solid choice for makers who need a dependable material for regular FDM printing. ABS remains widely used for functional parts because it offers a familiar balance of durability and stable printing behavior.\u003c\/p\u003e\u003cp\u003eThis spool contains \u003cstrong\u003e1 kg\u003c\/strong\u003e of filament, which is approximately \u003cstrong\u003e400 m\u003c\/strong\u003e in length. With a \u003cstrong\u003e1.75 mm\u003c\/strong\u003e diameter, it fits most desktop FDM printers that use the standard filament size.\u003c\/p\u003e\u003cp\u003eIn everyday printing, ABS is often chosen for brackets, housings, mounts, and other parts that need to keep their shape during regular use.\u003c\/p\u003e\u003ch3\u003eA Color That Helps in Real Projects\u003c\/h3\u003e\u003cp\u003eColor can be practical, not just decorative. \u003cstrong\u003eAbs filament green\u003c\/strong\u003e is often picked when printed parts need to be easy to see on the workbench or easy to sort inside larger assemblies.\u003c\/p\u003e\u003cp\u003eMany makers use \u003cstrong\u003egreen abs filament\u003c\/strong\u003e for prototypes, workshop accessories, and functional components that benefit from clear visual identification. It can also make small details and edges easier to notice during inspection.\u003c\/p\u003e\u003ch3\u003eReliable Extrusion for Functional Prints\u003c\/h3\u003e\u003cp\u003eWhen printing useful parts, steady material flow matters. A dependable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth extrusion through the hotend and supports consistent layer adhesion during the print.\u003c\/p\u003e\u003cp\u003eThat becomes especially important when parts need to align with other components or hold their intended geometry across the full print.\u003c\/p\u003e\u003cp\u003eBecause of that, \u003cstrong\u003egreen abs filament 1.75\u003c\/strong\u003e is commonly used for prototypes, replacement parts, and workshop tools.\u003c\/p\u003e\u003ch3\u003eA Full Spool for Ongoing Work\u003c\/h3\u003e\u003cp\u003eA \u003cstrong\u003e1 kg\u003c\/strong\u003e spool gives you enough material for multiple prints and longer projects without frequent filament changes.\u003c\/p\u003e\u003cp\u003eFor makers working on practical 3D printing tasks, this \u003cstrong\u003egreen abs filament 1.75\u003c\/strong\u003e offers a straightforward material for everyday FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Green\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53198238744916,"sku":"ABS-106400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-green.jpg?v=1765376656"},{"product_id":"abs-gray-1-75mm-1kg-400m","title":"ABS Gray 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Neutral Filament for Practical Printing\u003c\/h3\u003e \u003cp\u003eIn many workshops, neutral colors are often the most practical choice. \u003cstrong\u003egrey abs filament 1.75\u003c\/strong\u003e is one of those materials that quietly fits into a wide range of printing tasks, especially when the goal is functional parts rather than decorative models.\u003c\/p\u003e \u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of ABS filament\u003c\/strong\u003e, which equals approximately \u003cstrong\u003e400 meters\u003c\/strong\u003e. The \u003cstrong\u003e1.75 mm diameter\u003c\/strong\u003e is compatible with most FDM printers designed for standard filament sizes.\u003c\/p\u003e \u003cp\u003eABS is widely used for printing components that need a balance of durability and dimensional stability. Brackets, housings, fixtures, and workshop tools are typical examples where this material is often used.\u003c\/p\u003e \u003ch3\u003eA Practical Color for Mechanical Parts\u003c\/h3\u003e \u003cp\u003eGrey tends to be a practical color in everyday printing. \u003cstrong\u003eAbs filament grey\u003c\/strong\u003e is often chosen for mechanical parts where appearance is less important than clarity and usability.\u003c\/p\u003e \u003cp\u003eThe color makes it easier to see surface details, edges, and layer lines during inspection. Many makers prefer \u003cstrong\u003egrey abs filament\u003c\/strong\u003e when producing prototypes or components that will be handled frequently during testing.\u003c\/p\u003e \u003cp\u003eIt also works well for parts that may later be painted or integrated into larger assemblies.\u003c\/p\u003e \u003ch3\u003eConsistent Material Flow During Printing\u003c\/h3\u003e \u003cp\u003eReliable extrusion plays a big role in stable FDM printing. A well-made \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e helps maintain smooth feeding through the hotend and supports steady layer adhesion while printing.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains consistent, printed parts are more likely to maintain their intended geometry. This becomes especially important when components need to align with other printed or mechanical elements.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003egrey abs filament 1.75\u003c\/strong\u003e is commonly used for workshop tools, replacement parts, and everyday prototyping work.\u003c\/p\u003e \u003ch3\u003eA Full Spool for Larger Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides a comfortable supply of material for ongoing printing projects. It allows makers to run multiple prints without needing to change filament frequently.\u003c\/p\u003e \u003cp\u003eFor those working on prototypes, mechanical components, or general workshop prints, this \u003cstrong\u003egrey abs filament 1.75\u003c\/strong\u003e offers a practical and familiar material for regular FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Gray\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53198249558356,"sku":"ABS-115400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-gray_91fc0b58-28d4-4972-b843-14f39568bf48.jpg?v=1765376953"},{"product_id":"abs-orange-1-75mm-1kg-400m","title":"ABS Orange 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOrange abs filament 1.75\u003c\/strong\u003e is often selected when printed parts need to be easy to notice. The bright color helps components stand out on the workbench, which can be useful when several parts from different prints are lying nearby.\u003c\/p\u003e\n\n\u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals approximately \u003cstrong\u003e400 meters\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the standard size used by most desktop FDM printers.\u003c\/p\u003e\n\n\u003cp\u003eABS remains a familiar material in FDM printing because it performs well for practical parts. Many makers use it to print brackets, housings, mounts, and various workshop accessories.\u003c\/p\u003e\n\n\u003ch3\u003eA Bright and Visible Color\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAbs filament orange\u003c\/strong\u003e is often used when printed parts should be clearly visible during assembly or testing. Some makers choose \u003cstrong\u003eorange abs filament\u003c\/strong\u003e to mark prototypes or different design versions.\u003c\/p\u003e\n\n\u003ch3\u003eStable Printing Behavior\u003c\/h3\u003e\n\u003cp\u003eA reliable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e usually feeds smoothly through the hotend and supports steady layer adhesion during printing. When extrusion remains consistent, printed parts tend to maintain their intended geometry.\u003c\/p\u003e\n\n\u003cp\u003eBecause of that, \u003cstrong\u003eorange abs filament 1.75\u003c\/strong\u003e is commonly used for prototypes, workshop tools, and functional replacement parts.\u003c\/p\u003e\n\n\u003ch3\u003eSpool Capacity\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough material for several prints or larger projects without frequent filament changes.\u003c\/p\u003e\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Orange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53198291665236,"sku":"ABS-104400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-orange.jpg?v=1765377535"},{"product_id":"abs-blue-1-75mm-1kg-400m","title":"ABS Blue 1,75mm 1kg\/400m","description":"\u003ch3\u003eBlue ABS+ Filament for Everyday FDM Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eblue abs+ filament 1.75\u003c\/strong\u003e is intended for makers who need a reliable material for regular printing work. ABS-based materials remain a familiar choice in many workshops because they provide a solid balance between strength and practical usability in FDM printers.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e1 kg\u003c\/strong\u003e of filament, with an approximate length of \u003cstrong\u003e400 m\u003c\/strong\u003e. With a standard \u003cstrong\u003e1.75 mm\u003c\/strong\u003e diameter, the material is compatible with most desktop FDM printing setups and fits typical extruder systems used by hobbyists and professionals alike.\u003c\/p\u003e \u003ch3\u003eA Practical Material for Functional Prints\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, materials that behave predictably tend to save the most time. This \u003cstrong\u003eabs+ filament blue\u003c\/strong\u003e can be used for a wide range of objects, from simple prototypes to functional workshop parts. Brackets, housings, tool holders, and mechanical components are common examples where ABS-based materials are often used.\u003c\/p\u003e \u003cp\u003eThe blue color also has a practical advantage during development work. Many makers use color to separate different prototype iterations or to identify components inside assemblies. Using \u003cstrong\u003eblue abs+ filament\u003c\/strong\u003e helps keep printed parts visually organized.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion and Stable Printing\u003c\/h3\u003e \u003cp\u003eStable extrusion is one of the key factors behind reliable prints. A consistent \u003cstrong\u003eabs+ filament 1.75\u003c\/strong\u003e helps maintain smooth material flow through the hotend, which supports steady layer formation during printing. That matters when printing larger objects where dimensional stability and strong layer bonding are important.\u003c\/p\u003e \u003cp\u003eMany makers rely on \u003cstrong\u003eblue abs+ filament 1.75\u003c\/strong\u003e for routine prototyping and mechanical parts where repeatable results matter more than anything else.\u003c\/p\u003e \u003ch3\u003eA Familiar Choice in Workshop Printing\u003c\/h3\u003e \u003cp\u003eFor many workshops, \u003cstrong\u003eabs+ filament blue\u003c\/strong\u003e becomes part of the regular printing workflow. The material is often used when creating replacement parts, small functional tools, or prototype components during product development.\u003c\/p\u003e \u003cp\u003eWhen the goal is dependable printing with a clearly visible color, this \u003cstrong\u003eblue abs+ filament 1.75\u003c\/strong\u003e offers a straightforward solution for everyday FDM printing tasks.\u003c\/p\u003e\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53198349369684,"sku":"ABS-107400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-blue_8e1d7e69-1a44-4f21-933f-0623ed4c5173.jpg?v=1765378746"},{"product_id":"abs-lime-green-1-75mm-1kg-400m","title":"ABS Lime Green 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical Filament for Everyday Printing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLime green abs filament 1.75\u003c\/strong\u003e is often chosen when printed parts need to be easy to identify. The bright color stands out on the workbench, which can make it easier to organize multiple printed components during a project.\u003c\/p\u003e\n\n\u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e. The filament diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, a standard size used by most FDM printers.\u003c\/p\u003e\n\n\u003cp\u003eABS is commonly used for brackets, housings, mounts, and other functional components that should keep their shape during regular use.\u003c\/p\u003e\n\n\u003ch3\u003eA Color That Stands Out\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAbs filament lime green\u003c\/strong\u003e is easy to notice when parts are mixed together on a table or inside an assembly. Many makers use \u003cstrong\u003elime green abs filament\u003c\/strong\u003e for prototypes or test prints simply because the color helps distinguish parts quickly.\u003c\/p\u003e\n\n\u003ch3\u003eConsistent Printing Behavior\u003c\/h3\u003e\n\u003cp\u003eA stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly through the hotend and supports steady layer adhesion during printing. When extrusion remains consistent, printed objects usually keep their intended geometry more accurately.\u003c\/p\u003e\n\n\u003cp\u003eBecause of that, \u003cstrong\u003elime green abs filament 1.75\u003c\/strong\u003e is often used for prototypes, workshop tools, and replacement parts.\u003c\/p\u003e\n\n\u003ch3\u003eSpool Size\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough filament for several prints or a series of prototypes. For makers working on regular projects, this amount of material is often the most convenient option.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Lime Green\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53202893701460,"sku":"ABS-109400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-limegreen.jpg?v=1765450588"},{"product_id":"abs-red-1-75mm-1kg-400m","title":"ABS Red 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eRed abs filament 1.75\u003c\/strong\u003e is often picked when you want printed parts to be clearly visible and easy to track. The color is bold and helps distinguish components during a project.\u003c\/p\u003e \u003cp\u003eThis spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, so it works with most standard FDM printers.\u003c\/p\u003e \u003cp\u003eABS is commonly used for brackets, housings, mounts, and other functional parts that need to stay stable during use.\u003c\/p\u003e \u003ch3\u003eA Color That Stands Out\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eAbs filament red\u003c\/strong\u003e makes printed parts easy to spot on a workbench. Many makers use \u003cstrong\u003ered abs filament\u003c\/strong\u003e for prototypes and design variations.\u003c\/p\u003e \u003ch3\u003ePrinting Behavior in Practice\u003c\/h3\u003e \u003cp\u003eA consistent \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e feeds smoothly and keeps extrusion stable. When flow remains even, printed parts tend to maintain their intended geometry.\u003c\/p\u003e \u003cp\u003eBecause of that, \u003cstrong\u003ered abs filament 1.75\u003c\/strong\u003e is often used for workshop tools, prototypes, and replacement parts.\u003c\/p\u003e \u003ch3\u003eA Full Spool for Ongoing Projects\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough material for multiple prints without frequent changes.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Red\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53202905039188,"sku":"ABS-105400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-red_339761a7-4af6-48be-b0ce-906f30ef6c87.jpg?v=1765450902"},{"product_id":"abs-black-1-75mm-1kg-400m","title":"ABS Black 1,75mm 1kg\/400m","description":"\u003ch3\u003eBlack ABS Filament 1.75 mm for Everyday FDM Printing\u003c\/h3\u003e\n\u003cp\u003eThis \u003cstrong\u003eblack abs filament 1.75\u003c\/strong\u003e is intended for makers who want a dependable material for practical 3D printing. ABS has long been used in FDM printers when parts need to be durable, resistant to wear, and stable during everyday use. The classic black color also makes it a versatile option for both visible components and internal mechanical parts.\u003c\/p\u003e\n\u003cp\u003eIn many workshops, \u003cstrong\u003eblack abs filament 1.75\u003c\/strong\u003e becomes a standard spool that stays loaded in the printer. The material handles routine prints well and works for everything from prototypes to replacement parts around the house or workshop.\u003c\/p\u003e\n\u003ch3\u003eWhere ABS Makes Sense\u003c\/h3\u003e\n\u003cp\u003eABS is commonly used when printed objects need a bit more resilience compared to basic materials. Many makers choose \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e for brackets, housings, connectors, and other parts that may experience light mechanical stress.\u003c\/p\u003e\n\u003cp\u003eThe black color keeps the final result visually clean and neutral. That matters when printing components that should blend into devices, electronics, or tools. Using \u003cstrong\u003eabs filament black\u003c\/strong\u003e is also practical when several parts of a project need a consistent appearance.\u003c\/p\u003e\n\u003ch3\u003eReliable Extrusion in Day-to-Day Printing\u003c\/h3\u003e\n\u003cp\u003eFor everyday prints, stable extrusion and predictable behavior are often more important than anything else. With proper printer settings, \u003cstrong\u003eblack abs filament\u003c\/strong\u003e can produce smooth layers and solid bonding between them.\u003c\/p\u003e\n\u003cp\u003eIn practice, \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e works well for FDM printers used for prototyping, workshop tools, and mechanical components. Consistent extrusion helps maintain dimensional stability, which is important when printed pieces must fit with other parts.\u003c\/p\u003e\n\u003ch3\u003eA Practical Choice for Functional Projects\u003c\/h3\u003e\n\u003cp\u003eOne reason many makers keep \u003cstrong\u003eabs filament black\u003c\/strong\u003e on hand is its usefulness across a wide range of prints. From simple jigs and fixtures to protective covers and structural elements, ABS often becomes the material of choice for functional designs.\u003c\/p\u003e\n\u003cp\u003eBecause this spool contains approximately \u003cstrong\u003e400 m\u003c\/strong\u003e of filament and weighs \u003cstrong\u003e1 kg\u003c\/strong\u003e, it provides enough material for multiple projects or longer print runs. That makes \u003cstrong\u003eblack abs filament 1.75\u003c\/strong\u003e a convenient option for regular 3D printing work.\u003c\/p\u003e\n\u003cp\u003eWhether used for prototyping or everyday workshop prints, \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e remains a familiar and reliable material in many FDM setups.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53203193266516,"sku":"ABS-108400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-black.jpg?v=1765458733"},{"product_id":"abs-maroon-1-75mm-1kg-400m","title":"ABS Maroon 1,75mm 1kg\/400m","description":"\u003ch3\u003eA Practical ABS Filament for Everyday Printing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMaroon abs filament 1.75\u003c\/strong\u003e is a nice option when you want something a bit different from the usual colors used in 3D printing. The darker red tone gives printed parts a distinctive look while still keeping the familiar characteristics of ABS.\u003c\/p\u003e\n\n\u003cp\u003eThe spool contains \u003cstrong\u003e1 kg of filament\u003c\/strong\u003e, which equals roughly \u003cstrong\u003e400 meters\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, a standard size supported by most desktop FDM printers.\u003c\/p\u003e\n\n\u003cp\u003eABS is widely used for practical objects rather than decorative models. Makers often print brackets, covers, mounts, and various workshop parts with this material because it keeps its shape well and works reliably in everyday use.\u003c\/p\u003e\n\n\u003ch3\u003eA Color That Stands Out\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAbs filament maroon\u003c\/strong\u003e helps printed parts stand out when several components are lying on the same workbench. Some makers also use \u003cstrong\u003emaroon abs filament\u003c\/strong\u003e to mark different versions of prototypes or design iterations.\u003c\/p\u003e\n\n\u003ch3\u003ePrinting Characteristics\u003c\/h3\u003e\n\u003cp\u003eA stable \u003cstrong\u003eabs filament 1.75\u003c\/strong\u003e usually feeds smoothly through the hotend. When the material flows consistently, layer adhesion remains steady and printed objects keep their intended geometry.\u003c\/p\u003e\n\n\u003cp\u003eBecause of that, \u003cstrong\u003emaroon abs filament 1.75\u003c\/strong\u003e is commonly used for prototypes, workshop tools, and functional parts.\u003c\/p\u003e\n\n\u003ch3\u003eSpool Capacity\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e1 kg spool\u003c\/strong\u003e provides enough filament for several prints without frequent material changes, making it convenient for regular FDM printing.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1000 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Maroon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000; font-size: 20px; font-weight: 600;\"\u003eTechnical data of the spool\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53203207815508,"sku":"ABS-111400","price":74.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-400-maroon_fdee991f-e405-4d9a-a2da-134b9e5df362.jpg?v=1765459027"}],"url":"https:\/\/shop.plexiwire.com\/en-us\/collections\/abs.oembed","provider":"Plexiwire","version":"1.0","type":"link"}