{"title":"Filaments carbon","description":"\u003ch2\u003eWhat 10% carbon fibre provides\u003c\/h2\u003e\n\u003cp\u003eChopped carbon fibre has two effects. It increases stiffness, reducing flex under load and creep over time, and it improves dimensional stability, so CF parts warp less than their unfilled equivalents and present a matte finish that conceals layer lines.\u003c\/p\u003e\n\u003cp\u003eIt does not increase strength in every respect. Fibres add rigidity at a small cost to impact toughness. For parts that must withstand impact, unfilled PETG is the better choice.\u003c\/p\u003e\n\u003ch2\u003eFour base materials\u003c\/h2\u003e\n\u003cp\u003ePLA CF10 (205–220 °C, 40–60 °C bed): the easiest CF material to print, with the least warping, a matte black finish and noticeably higher stiffness than standard PLA.\u003c\/p\u003e\n\u003cp\u003ePETG CF10 (230–255 °C, 50–70 °C bed): stiffness combined with PETG's heat and impact tolerance. The most versatile of the four.\u003c\/p\u003e\n\u003cp\u003eABS CF10 (235–250 °C, 90–110 °C bed): heat resistance with substantially reduced warping. Enclosure required.\u003c\/p\u003e\n\u003cp\u003eNylon CF10 (255–265 °C, 100–120 °C bed): wear resistance combined with stiffness. Requires drying before printing.\u003c\/p\u003e\n\u003ch2\u003eA hardened nozzle is required\u003c\/h2\u003e\n\u003cp\u003eCarbon fibre is abrasive and will wear a brass nozzle out of tolerance within one or two spools, causing dimensional drift. Fit a hardened steel or ruby nozzle before printing any CF material. This is a requirement, not a recommendation.\u003c\/p\u003e\n\u003ch2\u003eColours and spools\u003c\/h2\u003e\n\u003cp\u003eCF10 is black across all four materials, as carbon fibre content precludes pigment. Spool sizes follow each base material.\u003c\/p\u003e","products":[{"product_id":"abs-cf10-filament-1-75mm-black-250g-100m","title":"ABS CF10 Black 1,75mm 250g\/100m","description":"\u003ch3\u003eCarbon-Fiber Reinforced Filament for Technical Prints\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e is intended for projects where rigidity and stable geometry matter. Reinforced materials like CF-based filaments are commonly used in FDM printing when printed parts need to stay stiff and hold their shape during use.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which matches the standard configuration used by most desktop FDM printers.\u003c\/p\u003e \u003cp\u003eIn practice, carbon-fiber reinforced filament often appears in projects focused on functional components rather than purely visual prints.\u003c\/p\u003e \u003ch3\u003eA Material Often Used for Mechanical Parts\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003ecf 10 filament black\u003c\/strong\u003e becomes useful when printing parts that must remain structurally stable. Brackets, mounts, housings, and small structural elements are typical examples where reinforced filament is used.\u003c\/p\u003e \u003cp\u003eThe black color also gives printed components a technical appearance that fits well with workshop equipment or prototype assemblies. Because of that, many users prefer \u003cstrong\u003eblack cf 10 filament\u003c\/strong\u003e when printing functional parts for machines or mechanical projects.\u003c\/p\u003e \u003cp\u003eIt is also common to use this type of material during product development, especially when checking part geometry or testing how components fit together.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion During Printing\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, predictable extrusion plays a major role in the final result. A stable \u003cstrong\u003ecf 10 filament 1.75\u003c\/strong\u003e helps maintain steady material flow through the hotend and supports reliable layer bonding throughout the print.\u003c\/p\u003e \u003cp\u003eWhen extrusion stays consistent, the printed part tends to maintain its intended dimensions more easily. This becomes particularly noticeable when printing parts that must align with other components.\u003c\/p\u003e \u003cp\u003eFor this reason, many users choose \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e when working on functional prototypes or workshop tools.\u003c\/p\u003e \u003ch3\u003eCompact Spool for Development and Testing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is often convenient when testing materials or producing smaller batches of parts. It provides enough filament for several prototypes without committing to a full-size spool.\u003c\/p\u003e \u003cp\u003eFor experimentation, design iterations, or small functional prints, this \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":48039802208596,"sku":"ABS-1208100","price":45.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-CF10-black-plexiwire-100m.jpg?v=1714383742"},{"product_id":"pla-cf10-filament-1-75mm-black-300g-100m","title":"PLA CF10 Black 1,75mm 300g\/100m","description":"\u003ch3\u003eBlack  Filament 1.75 for simple, flexible printing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBlack  filament 1.75\u003c\/strong\u003e in a 300 g (100 m) spool is a compact option for everyday use.\u003c\/p\u003e\n\u003cp\u003eIt’s easy to handle and quick to swap between prints.\u003c\/p\u003e\n\u003ch3\u003eWhat to expect during printing\u003c\/h3\u003e\n\u003cp\u003eWith \u003cstrong\u003eblack  filament 1.75\u003c\/strong\u003e, extrusion stabilizes after the first layers and remains consistent.\u003c\/p\u003e\n\u003cp\u003eThis helps keep prints predictable and steady.\u003c\/p\u003e\n\u003ch3\u003eHow it’s typically used\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFilament black\u003c\/strong\u003e is commonly used for simple parts, prototypes, and general-purpose printing.\u003c\/p\u003e\n\u003cp\u003eIt’s chosen for ease of use and consistent behavior.\u003c\/p\u003e\n\u003ch3\u003eWhy a 300 g spool makes sense\u003c\/h3\u003e\n\u003cp\u003eA 300 g spool is ideal for short runs and flexible workflows.\u003c\/p\u003e\n\u003cp\u003eEven at this size, \u003cstrong\u003e filament 1.75\u003c\/strong\u003e maintains steady output.\u003c\/p\u003e\n\u003ch3\u003eA simple, consistent black look\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBlack  filament\u003c\/strong\u003e offers a clean and uniform appearance.\u003c\/p\u003e\n\u003cp\u003eThe color remains even across printed surfaces.\u003c\/p\u003e\n\u003ch3\u003eFor everyday, no-surprise printing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBlack  filament\u003c\/strong\u003e is suited for consistent, repeatable prints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack  filament 1.75\u003c\/strong\u003e in a 300 g (100 m) spool works well in flexible setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e PLA CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 205°C - 220°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 40°C - 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 300 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":48039857652052,"sku":"PLA-608100","price":47.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/pla-CF10-black-plexiwire-100m.jpg?v=1714384696"},{"product_id":"petg-cf10-filament-1-75mm-black-300g-100m","title":"PETG CF10 Black 1,75mm 300g\/100m","description":"\u003ch3\u003eBlack None Filament 1.75 for controlled, everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament 1.75\u003c\/strong\u003e in a 300 g (100 m) spool is a practical choice when you want control without excess material.\u003c\/p\u003e \u003cp\u003eIt’s compact, easy to manage, and still enough for real prints.\u003c\/p\u003e \u003ch3\u003eHow it behaves once printing starts\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eblack none filament 1.75\u003c\/strong\u003e, the process settles quickly. Extrusion stays even, and layers build consistently.\u003c\/p\u003e \u003cp\u003eThis makes printing more predictable and reduces the need for constant adjustments.\u003c\/p\u003e \u003ch3\u003eWhy smaller spools are often more practical\u003c\/h3\u003e \u003cp\u003eA 300 g spool works well for testing, short runs, and focused projects.\u003c\/p\u003e \u003cp\u003eEven at this size, \u003cstrong\u003enone filament 1.75\u003c\/strong\u003e maintains stable output and repeatable results.\u003c\/p\u003e \u003ch3\u003eA black finish that stays neutral\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eNone filament black\u003c\/strong\u003e offers a simple, versatile look that fits most applications.\u003c\/p\u003e \u003cp\u003eIt also helps reduce the visibility of minor surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor prints that just need to work\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament\u003c\/strong\u003e is commonly used for prototypes and everyday parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament 1.75\u003c\/strong\u003e in a 300 g (100 m) spool integrates easily into flexible workflows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e PETG CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 230°C - 255°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 50°C - 70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 300 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":48039932232020,"sku":"PETG-1808100","price":44.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/petg-cf10-black-plexiwire-100m.jpg?v=1747150473"},{"product_id":"nylon-cf10-filament-1-75mm-black-275g-100m","title":"NYLON CF10 Black 1,75mm 275g\/100m","description":"\u003ch3\u003eBlack None Filament 1.75 for simple, controlled printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament 1.75\u003c\/strong\u003e in a 275 g (100 m) spool is usually chosen when you don’t need a full roll sitting on the printer.\u003c\/p\u003e \u003cp\u003eIt’s a compact format, but still enough for real prints — not just quick tests.\u003c\/p\u003e \u003ch3\u003ePrinting that stays predictable\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eblack none filament 1.75\u003c\/strong\u003e, the process settles quickly once your settings are in place.\u003c\/p\u003e \u003cp\u003eThe filament feeds smoothly, extrusion stays even, and layers build consistently.\u003c\/p\u003e \u003ch3\u003eWhen a smaller spool actually helps\u003c\/h3\u003e \u003cp\u003eA 275 g spool gives you more control over material usage and workflow.\u003c\/p\u003e \u003cp\u003eEven at this size, \u003cstrong\u003enone filament 1.75\u003c\/strong\u003e maintains stable output and predictable dimensions.\u003c\/p\u003e \u003ch3\u003eA simple, neutral finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eNone filament black\u003c\/strong\u003e offers a clean, understated look.\u003c\/p\u003e \u003cp\u003eIt also helps reduce the visibility of small surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor controlled, everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament\u003c\/strong\u003e is often used for prototypes and smaller functional parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament 1.75\u003c\/strong\u003e in a 275 g (100 m) spool fits naturally into flexible workflows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e NYLON PA6 CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 255°C - 265°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 100°C - 120°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":48039990591828,"sku":"NYLON-1008100","price":54.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/nylon-CF10-black-plexiwire-100m.jpg?v=1714386794"},{"product_id":"nylon-cf10-filament-1-75mm-black-550g-200m","title":"NYLON CF10 Black 1,75mm 550g\/200m","description":"\u003ch3\u003eBlack None Filament 1.75 for balanced everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament 1.75\u003c\/strong\u003e in a 550 g (200 m) spool offers a practical balance between small and full-size rolls.\u003c\/p\u003e \u003cp\u003eIt provides enough material for longer prints while keeping your workflow flexible.\u003c\/p\u003e \u003ch3\u003ePrinting that stays consistent\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eblack none filament 1.75\u003c\/strong\u003e, extrusion remains stable and layers build evenly once your setup is dialed in.\u003c\/p\u003e \u003cp\u003eThe filament feeds smoothly and helps reduce small print defects.\u003c\/p\u003e \u003ch3\u003eA spool size that fits real workflows\u003c\/h3\u003e \u003cp\u003eA 550 g spool is well suited for extended prints or multiple parts without constant interruptions.\u003c\/p\u003e \u003cp\u003eEven at this size, \u003cstrong\u003enone filament 1.75\u003c\/strong\u003e maintains predictable output.\u003c\/p\u003e \u003ch3\u003eA clean, neutral look\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eNone filament black\u003c\/strong\u003e offers a simple, versatile appearance.\u003c\/p\u003e \u003cp\u003eIt also helps mask minor surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor everyday printing without complications\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament\u003c\/strong\u003e is commonly used for prototypes and general-purpose parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament 1.75\u003c\/strong\u003e in a 550 g (200 m) spool integrates easily into regular printing workflows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e NYLON PA6 CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 255°C - 265°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 100°C - 120°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 550 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 200 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":48040758280532,"sku":"NYLON-1008200","price":103.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-nylon-cf10-200.jpg?v=1714393090"},{"product_id":"petg-cf10-black-1-75mm-600g-200m","title":"PETG CF10 Black 1,75mm 600g\/200m","description":"\u003ch3\u003eBlack None Filament 1.75 for balanced everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament 1.75\u003c\/strong\u003e in a 600 g (200 m) spool fits naturally into regular 3D printing workflows.\u003c\/p\u003e \u003cp\u003eIt provides enough material for longer prints while staying manageable.\u003c\/p\u003e \u003ch3\u003ePrinting that settles into place\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eblack none filament 1.75\u003c\/strong\u003e, extrusion stabilizes early and layers build consistently.\u003c\/p\u003e \u003cp\u003eThe filament feeds smoothly and helps reduce small print defects.\u003c\/p\u003e \u003ch3\u003eA spool size that supports real work\u003c\/h3\u003e \u003cp\u003eA 600 g spool is well suited for medium-length prints and repeated parts.\u003c\/p\u003e \u003cp\u003eEven at this size, \u003cstrong\u003enone filament 1.75\u003c\/strong\u003e maintains predictable output.\u003c\/p\u003e \u003ch3\u003eA clean and practical black finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eNone filament black\u003c\/strong\u003e offers a simple, neutral appearance.\u003c\/p\u003e \u003cp\u003eIt also helps mask minor surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor steady, everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament\u003c\/strong\u003e is commonly used for prototypes and general-purpose parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlack none filament 1.75\u003c\/strong\u003e in a 600 g (200 m) spool integrates easily into everyday workflows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e PETG CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 230°C - 255°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 50°C - 70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 600 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 200 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":51849939091796,"sku":"PETG-1808200","price":83.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/PETG-CF-10-Black-200.jpg?v=1747148327"},{"product_id":"abs-cf10-black-1-75mm-500g-200m","title":"ABS CF10 Black 1,75mm 500g\/200m","description":"\u003ch3\u003eCarbon Fiber Reinforced Filament for Technical Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e is intended for makers who need a material suited for technical 3D printing projects. Carbon-fiber reinforced filaments are commonly used in FDM printing when rigidity and dimensional stability become important factors in the final printed part.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e500 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e200 m\u003c\/strong\u003e. With a standard diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the material fits most desktop FDM printers designed for this filament size.\u003c\/p\u003e \u003cp\u003eIn practice, reinforced materials like this are often chosen when printed parts need to maintain their shape and structure across larger surfaces or mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eReliable Material for Functional Parts\u003c\/h3\u003e \u003cp\u003eFor many workshops, carbon-fiber reinforced filament becomes a useful option when producing mechanical components or test prototypes. This \u003cstrong\u003ecf 10 filament black\u003c\/strong\u003e can be used for brackets, housings, structural elements, or mounting parts where stiffness helps maintain reliable geometry.\u003c\/p\u003e \u003cp\u003eThe black color also gives printed parts a clean technical appearance. Many makers prefer \u003cstrong\u003eblack cf 10 filament\u003c\/strong\u003e when printing engineering-style components or workshop tools because the color naturally fits functional designs.\u003c\/p\u003e \u003cp\u003eDuring prototype development, this type of material is often used for testing shapes, assemblies, and structural layouts before moving into full production.\u003c\/p\u003e \u003ch3\u003eStable Extrusion in Everyday Printing\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, consistent material flow plays an important role in achieving stable prints. A reliable \u003cstrong\u003ecf 10 filament 1.75\u003c\/strong\u003e helps maintain smooth extrusion and predictable layer formation throughout the printing process.\u003c\/p\u003e \u003cp\u003eThat consistency matters when printing objects where dimensional accuracy becomes visible across multiple layers or when producing parts that must fit together precisely.\u003c\/p\u003e \u003cp\u003eMany makers turn to \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e when they need dependable printing behavior during prototyping cycles or workshop manufacturing.\u003c\/p\u003e \u003ch3\u003eA Practical Spool Size for Prototyping\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e500 g\u003c\/strong\u003e spool is often convenient for experimentation and development work. For projects that require smaller batches or multiple material tests, this size helps reduce unused filament while still providing enough material for functional prints.\u003c\/p\u003e \u003cp\u003eFor prototypes, rigid parts, and engineering-focused prints, this \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 500 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 200 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53293951320404,"sku":"ABS-1208200","price":85.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-cf10-200.jpg?v=1767019277"},{"product_id":"abs-cf10-black-1-75mm-750g-300m","title":"ABS CF10 Black 1,75mm 750g\/300m","description":"\u003ch3\u003eWorking with Carbon-Fiber Reinforced Filament\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e is aimed at makers who need a material that behaves predictably when printing functional parts. Reinforced filaments are commonly used in FDM printing when rigidity and shape stability become more important than purely decorative results.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits the standard configuration used by most desktop FDM printers.\u003c\/p\u003e \u003cp\u003eIn practice, carbon-fiber materials often appear in projects where printed parts must remain stable across larger surfaces or in assemblies that carry some mechanical load.\u003c\/p\u003e \u003ch3\u003eWhere This Material Is Often Used\u003c\/h3\u003e \u003cp\u003eFor many workshops, \u003cstrong\u003ecf 10 filament black\u003c\/strong\u003e becomes part of the regular toolkit. It is commonly used for printing brackets, housings, mounts, and structural components that benefit from a more rigid material.\u003c\/p\u003e \u003cp\u003eThe black color also plays a practical role. In prototype development, darker technical colors make parts easier to integrate visually with other mechanical elements. Many makers prefer \u003cstrong\u003eblack cf 10 filament\u003c\/strong\u003e when printing workshop tools or engineering-style components.\u003c\/p\u003e \u003cp\u003eThis type of material is also frequently used during early product development, when designers need to check fit, alignment, or mechanical layout before moving to production materials.\u003c\/p\u003e \u003ch3\u003ePrinting Behavior in Daily Use\u003c\/h3\u003e \u003cp\u003eConsistency matters more than anything during long print sessions. A reliable \u003cstrong\u003ecf 10 filament 1.75\u003c\/strong\u003e helps maintain steady extrusion and stable layer formation throughout the print.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains predictable, parts tend to keep their intended geometry more reliably. This becomes especially noticeable in larger prints or in objects where several components must fit together precisely.\u003c\/p\u003e \u003cp\u003eBecause of that, many users turn to \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e when working on prototypes, workshop tools, or functional mechanical parts.\u003c\/p\u003e \u003ch3\u003eA Practical Spool Size for Workshop Printing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool sits in a convenient middle ground. It provides enough material for functional parts and design testing while remaining manageable for regular printing cycles.\u003c\/p\u003e \u003cp\u003eFor makers producing rigid components or experimenting with reinforced materials, this \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e offers a practical option for everyday FDM printing projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53294033338708,"sku":"ABS-1208300","price":136.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs_-300-black_a5867325-def1-43b3-a73f-28c5335ff424.jpg?v=1767008901"},{"product_id":"abs-cf10-black-1-75mm-1kg-400m","title":"ABS CF10 Black 1,75mm 1kg\/400m","description":"\u003ch3\u003eCarbon Fiber Reinforced Filament for Technical Prints\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e is intended for makers who need a material suited for more demanding 3D printing projects. Carbon-fiber reinforced filaments are often used in FDM printing when dimensional stability and structural rigidity are important during the printing process.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e1 kg\u003c\/strong\u003e of filament with an approximate length of \u003cstrong\u003e400 m\u003c\/strong\u003e. With a standard \u003cstrong\u003e1.75 mm\u003c\/strong\u003e diameter, it fits most desktop FDM printers that support this filament size.\u003c\/p\u003e \u003cp\u003eIn many workshops, carbon-fiber materials are chosen for prints that need to stay stiff and maintain their shape even in larger components.\u003c\/p\u003e \u003ch3\u003eDesigned for Functional Parts and Prototyping\u003c\/h3\u003e \u003cp\u003eWhen printing mechanical components or engineering prototypes, material behavior matters. This \u003cstrong\u003ecf 10 filament black\u003c\/strong\u003e can be used for parts such as brackets, housings, mounting elements, and structural components where rigidity is useful.\u003c\/p\u003e \u003cp\u003eThe black color gives printed parts a technical, professional appearance that many makers prefer for functional prints and prototype development.\u003c\/p\u003e \u003cp\u003eFor many users, \u003cstrong\u003eblack cf 10 filament\u003c\/strong\u003e becomes part of the regular material lineup when producing workshop parts or testing product designs.\u003c\/p\u003e \u003ch3\u003eConsistent Printing with Reinforced Filament\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, reinforced filaments benefit from steady extrusion and stable layer formation. A consistent \u003cstrong\u003ecf 10 filament 1.75\u003c\/strong\u003e helps maintain predictable material flow during the printing process.\u003c\/p\u003e \u003cp\u003eThat stability matters when printing parts that need reliable geometry or when creating larger prints where dimensional consistency becomes more noticeable.\u003c\/p\u003e \u003cp\u003eWhen the printer is properly configured, \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e can support dependable printing for prototypes and technical components.\u003c\/p\u003e \u003ch3\u003eA Material Often Used in Engineering-Style Prints\u003c\/h3\u003e \u003cp\u003eMany makers reach for \u003cstrong\u003ecf 10 filament black\u003c\/strong\u003e when the goal is producing rigid parts for workshop use or testing mechanical designs. Reinforced filaments are often chosen for structural elements that benefit from added stiffness.\u003c\/p\u003e \u003cp\u003eFor prototypes, brackets, and mechanical assemblies, this \u003cstrong\u003eblack cf 10 filament 1.75\u003c\/strong\u003e offers a practical option for everyday engineering-focused FDM printing projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e ABS CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°C - 250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°C - 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53294049558868,"sku":"ABS-1208400","price":155.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs_-400-black_adbc2da9-4f34-4b21-ab1f-565363a5f26a.jpg?v=1767017836"},{"product_id":"pla-cf10-black-1-75mm-600g-200m","title":"PLA CF10 Black 1,75mm 600g\/200m","description":"\u003ch3\u003eBlack CF 10 Filament 1.75 for balanced, reliable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 600 g (200 m) spool is a practical choice for medium-length prints and regular use.\u003c\/p\u003e \u003cp\u003eIt keeps your workflow flexible while supporting longer jobs.\u003c\/p\u003e \u003ch3\u003eHow it behaves during printing\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eblack CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early and remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis helps maintain dimensional stability and cleaner surfaces.\u003c\/p\u003e \u003ch3\u003eWhere CF 10 fits in real use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament black\u003c\/strong\u003e is commonly used for functional parts, brackets, and structured components.\u003c\/p\u003e \u003cp\u003eIt’s chosen for predictable behavior and repeatable results.\u003c\/p\u003e \u003ch3\u003eA balanced spool for ongoing work\u003c\/h3\u003e \u003cp\u003eA 600 g spool supports medium-length prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament while staying easy to handle.\u003c\/p\u003e \u003ch3\u003eA matte and uniform black finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e offers a subtle and consistent appearance.\u003c\/p\u003e \u003cp\u003eThe tone remains even across printed surfaces.\u003c\/p\u003e \u003ch3\u003eFor consistent, repeatable results\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e is suited for reliable, repeatable prints.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 600 g (200 m) spool fits into workflows where consistency matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e PLA CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 205°C - 220°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 40°C - 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 600 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 200 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53294384021844,"sku":"PLA-608200","price":70.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/PLA-CF-10-Black-200.jpg?v=1767022079"},{"product_id":"pla-cf10-black-1-75mm-900g-300m","title":"PLA CF10 Black 1,75mm 900g\/300m","description":"\u003ch3\u003eBlack CF 10 Filament 1.75 for extended, stable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 900 g (300 m) spool is designed for longer prints and repeated production.\u003c\/p\u003e \u003cp\u003eIt supports uninterrupted workflows and consistent output.\u003c\/p\u003e \u003ch3\u003eHow it behaves during longer prints\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eblack CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early and remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis helps maintain dimensional stability and surface quality.\u003c\/p\u003e \u003ch3\u003eWhere CF 10 fits in real use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament black\u003c\/strong\u003e is commonly used for functional parts, brackets, and structured components.\u003c\/p\u003e \u003cp\u003eIt’s chosen for predictable behavior and repeatable results.\u003c\/p\u003e \u003ch3\u003eA spool that supports uninterrupted work\u003c\/h3\u003e \u003cp\u003eA 900 g spool supports longer prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament for extended jobs while staying manageable.\u003c\/p\u003e \u003ch3\u003eA matte and consistent black finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e offers a clean, understated appearance.\u003c\/p\u003e \u003cp\u003eThe tone remains even across printed surfaces.\u003c\/p\u003e \u003ch3\u003eFor steady, repeatable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e is suited for consistent, repeatable prints.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 900 g (300 m) spool fits into workflows where reliability matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e PLA CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 205°C - 220°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 40°C - 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 900 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53294444511572,"sku":"PLA-608300","price":136.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/pla-300-black.jpg?v=1764239326"},{"product_id":"pla-cf10-black-1-75mm-1-2kg-400m","title":"PLA CF10 Black 1,75mm 1.2kg\/400m","description":"\u003ch3\u003eBlack CF 10 Filament 1.75 for extended, stable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 1.2 kg (400 m) spool is designed for longer prints and repeated production.\u003c\/p\u003e \u003cp\u003eIt supports uninterrupted workflows and consistent output.\u003c\/p\u003e \u003ch3\u003eHow it behaves during printing\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eblack CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early and remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis helps maintain dimensional consistency and surface quality.\u003c\/p\u003e \u003ch3\u003eWhere CF 10 fits in real use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament black\u003c\/strong\u003e is commonly used for functional parts, brackets, and structured components.\u003c\/p\u003e \u003cp\u003eIt’s chosen for predictable behavior and repeatable results.\u003c\/p\u003e \u003ch3\u003eA spool designed for uninterrupted workflows\u003c\/h3\u003e \u003cp\u003eA 1.2 kg spool supports longer prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament for extended jobs while staying manageable.\u003c\/p\u003e \u003ch3\u003eA matte and consistent black finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e offers a clean, understated appearance.\u003c\/p\u003e \u003cp\u003eThe tone remains even across printed surfaces.\u003c\/p\u003e \u003ch3\u003eFor steady, repeatable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e is suited for consistent, repeatable prints.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 1.2 kg (400 m) spool fits into workflows where reliability matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e PLA CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 205°C - 220°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 40°C - 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1.2 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53294477836628,"sku":"PLA-608400","price":175.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/pla-300-black.jpg?v=1764239326"},{"product_id":"petg-cf10-black-1-75mm-900g-300m","title":"PETG CF10 Black 1,75mm 900g\/300m","description":"\u003ch3\u003eBlack CF 10 Filament 1.75 for extended, uninterrupted printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 900 g (300 m) spool is designed for longer prints and repeated production.\u003c\/p\u003e \u003cp\u003eIt keeps your workflow running without interruptions.\u003c\/p\u003e \u003ch3\u003eWhat to expect during printing\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eblack CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early and remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis steady flow helps reduce defects and keeps surfaces cleaner.\u003c\/p\u003e \u003ch3\u003eWhere it fits in real use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament black\u003c\/strong\u003e is commonly used for functional parts like brackets and housings.\u003c\/p\u003e \u003cp\u003eIt’s chosen for reliability in everyday use.\u003c\/p\u003e \u003ch3\u003eA larger spool for uninterrupted work\u003c\/h3\u003e \u003cp\u003eA 900 g spool supports longer prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament for extended jobs while staying manageable.\u003c\/p\u003e \u003ch3\u003eA more subdued black finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e offers a more muted, less reflective surface.\u003c\/p\u003e \u003cp\u003eIt also helps reduce the visibility of minor imperfections.\u003c\/p\u003e \u003ch3\u003eFor consistent, long-run printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e is suited for steady, repeatable printing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 900 g (300 m) spool fits workflows where reliability matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e PETG CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 230°C - 255°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 50°C - 70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 900 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53313743225172,"sku":"PETG-1808300","price":125.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-petg-300-black-new.jpg?v=1727174904"},{"product_id":"petg-cf10-black-1-75mm-1-2kg-400m","title":"PETG CF10 Black 1,75mm 1.2kg\/400m","description":"\u003ch3\u003eBlack CF 10 Filament 1.75 for steady, uninterrupted printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 1.2 kg (400 m) spool is designed for longer prints and continuous workflows.\u003c\/p\u003e \u003cp\u003eIt helps keep the process running without interruptions.\u003c\/p\u003e \u003ch3\u003eHow it behaves during printing\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eblack CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early and remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis steady flow helps reduce defects and keeps surfaces cleaner.\u003c\/p\u003e \u003ch3\u003eWhere this material fits\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament black\u003c\/strong\u003e is commonly used for brackets, housings, and functional components.\u003c\/p\u003e \u003cp\u003eIt’s chosen for reliability in everyday use.\u003c\/p\u003e \u003ch3\u003eA spool for uninterrupted work\u003c\/h3\u003e \u003cp\u003eA 1.2 kg spool supports longer prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament for extended jobs while staying manageable.\u003c\/p\u003e \u003ch3\u003eA clean, matte-like black appearance\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e offers a more subdued surface finish.\u003c\/p\u003e \u003cp\u003eIt also helps reduce the visibility of minor surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor steady, functional printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament\u003c\/strong\u003e is suited for consistent, repeatable prints.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlack CF 10 filament 1.75\u003c\/strong\u003e in a 1.2 kg (400 m) spool fits into workflows where reliability matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e PETG CF10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtruder temperature:\u003c\/b\u003e 230°C - 255°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform temperature:\u003c\/b\u003e 50°C - 70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNet weight:\u003c\/b\u003e 1.2 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilament color:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-style_1\"\u003e\n\u003cli\u003e\n\u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Default Title","offer_id":53313947599188,"sku":"PETG-1808400","price":160.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-petg-300-black-new.jpg?v=1727174904"}],"url":"https:\/\/shop.plexiwire.com\/en-gb\/collections\/filaments-carbon.oembed","provider":"Plexiwire","version":"1.0","type":"link"}