{"title":"Filaments carbon","description":"\u003ch2\u003eWhat 10% carbon fibre provides\u003c\/h2\u003e\n\u003cp\u003eChopped carbon fibre has two effects. It increases stiffness, reducing flex under load and creep over time, and it improves dimensional stability, so CF parts warp less than their unfilled equivalents and present a matte finish that conceals layer lines.\u003c\/p\u003e\n\u003cp\u003eIt does not increase strength in every respect. Fibres add rigidity at a small cost to impact toughness. For parts that must withstand impact, unfilled PETG is the better choice.\u003c\/p\u003e\n\u003ch2\u003eFour base materials\u003c\/h2\u003e\n\u003cp\u003ePLA CF10 (205–220 °C, 40–60 °C bed): the easiest CF material to print, with the least warping, a matte black finish and noticeably higher stiffness than standard PLA.\u003c\/p\u003e\n\u003cp\u003ePETG CF10 (230–255 °C, 50–70 °C bed): stiffness combined with PETG's heat and impact tolerance. The most versatile of the four.\u003c\/p\u003e\n\u003cp\u003eABS CF10 (235–250 °C, 90–110 °C bed): heat resistance with substantially reduced warping. Enclosure required.\u003c\/p\u003e\n\u003cp\u003eNylon CF10 (255–265 °C, 100–120 °C bed): wear resistance combined with stiffness. Requires drying before printing.\u003c\/p\u003e\n\u003ch2\u003eA hardened nozzle is required\u003c\/h2\u003e\n\u003cp\u003eCarbon fibre is abrasive and will wear a brass nozzle out of tolerance within one or two spools, causing dimensional drift. Fit a hardened steel or ruby nozzle before printing any CF material. This is a requirement, not a recommendation.\u003c\/p\u003e\n\u003ch2\u003eColours and spools\u003c\/h2\u003e\n\u003cp\u003eCF10 is black across all four materials, as carbon fibre content precludes pigment. Spool sizes follow each base material.\u003c\/p\u003e","products":[{"product_id":"abs-cf10-filament-1-75mm-black-250g-100m","title":"ABS CF10 Schwarz 1,75mm 250g\/100m","description":"\u003ch3\u003eCarbon-Fiber Reinforced Filament für Technical Drucke\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e is intended für projects where rigidity und stable geometry matter. Reinforced materials like CF-based filaments are commonly used in FDM printing when printed parts need to stay stiff und hold their shape during use.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e250 g\u003c\/strong\u003e of filament mit an approximate length of \u003cstrong\u003e100 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which matches the standard configuration used by most desktop FDM printers.\u003c\/p\u003e \u003cp\u003eIn practice, carbon-fiber reinforced filament often appears in projects focused on functional components rather than purely visual prints.\u003c\/p\u003e \u003ch3\u003eA Material Often Used für Mechanical Parts\u003c\/h3\u003e \u003cp\u003eFor many makers, \u003cstrong\u003ecf 10 filament Schwarz\u003c\/strong\u003e becomes useful when printing parts that must remain structurally stable. Brackets, mounts, housings, und small structural elements are typical examples where reinforced filament is used.\u003c\/p\u003e \u003cp\u003eThe Schwarz color also gives printed components a technical appearance that fits well mit workshop equipment oder prototype assemblies. Because of that, many users prefer \u003cstrong\u003eSchwarz cf 10 filament\u003c\/strong\u003e when printing functional parts für machines oder mechanical projects.\u003c\/p\u003e \u003cp\u003eIt is also common to use this type of material during product development, especially when checking part geometry oder testing how components fit together.\u003c\/p\u003e \u003ch3\u003eConsistent Extrusion During Printing\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, predictable extrusion plays a major role in the final result. A stable \u003cstrong\u003ecf 10 filament 1.75\u003c\/strong\u003e helps maintain steady material flow through the hotend und supports reliable layer bonding throughout the print.\u003c\/p\u003e \u003cp\u003eWhen extrusion stays consistent, the printed part tends to maintain its intended dimensions more easily. This becomes particularly noticeable when printing parts that must align mit other components.\u003c\/p\u003e \u003cp\u003eFor this reason, many users choose \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e when working on functional prototypes oder workshop tools.\u003c\/p\u003e \u003ch3\u003eCompact Spool für Development und Testing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e250 g\u003c\/strong\u003e spool is often convenient when testing materials oder producing smaller batches of parts. It provides enough filament für several prototypes without committing to a full-size spool.\u003c\/p\u003e \u003cp\u003eFor experimentation, design iterations, oder small functional prints, this \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e offers a practical option für everyday FDM printing work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e ABS CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°С - 250°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°С - 110°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":48039802208596,"sku":"ABS-1208100","price":45.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs-CF10-black-plexiwire-100m.jpg?v=1714383742"},{"product_id":"pla-cf10-filament-1-75mm-black-300g-100m","title":"PLA CF10 Schwarz 1,75mm 300g\/100m","description":"\u003ch3\u003eSchwarz Filament 1.75 für simple, Flexibel printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz filament 1.75\u003c\/strong\u003e in a 300 g (100 m) spool is a compact option für everyday use.\u003c\/p\u003e \u003cp\u003eIt’s easy to handle und quick to swap between prints.\u003c\/p\u003e \u003ch3\u003eWhat to expect during printing\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz filament 1.75\u003c\/strong\u003e, extrusion stabilizes after the first layers und remains consistent.\u003c\/p\u003e \u003cp\u003eThis helps keep prints predictable und steady.\u003c\/p\u003e \u003ch3\u003eHow it’s typically used\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFilament Schwarz\u003c\/strong\u003e is commonly used für simple parts, prototypes, und general-purpose printing.\u003c\/p\u003e \u003cp\u003eIt’s chosen für ease of use und consistent behavior.\u003c\/p\u003e \u003ch3\u003eWhy a 300 g spool makes sense\u003c\/h3\u003e \u003cp\u003eA 300 g spool is ideal für short runs und Flexibel workflows.\u003c\/p\u003e \u003cp\u003eEven at this size, \u003cstrong\u003e filament 1.75\u003c\/strong\u003e maintains steady output.\u003c\/p\u003e \u003ch3\u003eA simple, consistent Schwarz look\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz filament\u003c\/strong\u003e offers a clean und uniform appearance.\u003c\/p\u003e \u003cp\u003eThe color remains even across printed surfaces.\u003c\/p\u003e \u003ch3\u003eFor everyday, no-surprise printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz filament\u003c\/strong\u003e is suited für consistent, repeatable prints.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz filament 1.75\u003c\/strong\u003e in a 300 g (100 m) spool works well in Flexibel setups.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e PLA CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 205°С - 220°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 40°С - 60°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 300 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":48039857652052,"sku":"PLA-608100","price":47.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/pla-CF10-black-plexiwire-100m.jpg?v=1714384696"},{"product_id":"petg-cf10-filament-1-75mm-black-300g-100m","title":"PETG CF10 Schwarz 1,75mm 300g\/100m","description":"\u003ch3\u003eSchwarz None Filament 1.75 für controlled, everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e in a 300 g (100 m) spool is a practical choice when you want control without excess material.\u003c\/p\u003e \u003cp\u003eIt’s compact, easy to manage, und still enough für real prints.\u003c\/p\u003e \u003ch3\u003eHow it behaves once printing starts\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e, the process settles quickly. Extrusion stays even, und layers build consistently.\u003c\/p\u003e \u003cp\u003eThis makes printing more predictable und reduces the need für constant adjustments.\u003c\/p\u003e \u003ch3\u003eWhy smaller spools are often more practical\u003c\/h3\u003e \u003cp\u003eA 300 g spool works well für testing, short runs, und focused projects.\u003c\/p\u003e \u003cp\u003eEven at this size, \u003cstrong\u003enone filament 1.75\u003c\/strong\u003e maintains stable output und repeatable results.\u003c\/p\u003e \u003ch3\u003eA Schwarz finish that stays neutral\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eNone filament Schwarz\u003c\/strong\u003e offers a simple, versatile look that fits most applications.\u003c\/p\u003e \u003cp\u003eIt also helps reduce the visibility of minor surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor prints that just need to work\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament\u003c\/strong\u003e is commonly used für prototypes und everyday parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e in a 300 g (100 m) spool integrates easily into Flexibel workflows.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e PETG CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 230°С - 255°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 50°С - 70°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 300 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":48039932232020,"sku":"PETG-1808100","price":44.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/petg-cf10-black-plexiwire-100m.jpg?v=1747150473"},{"product_id":"nylon-cf10-filament-1-75mm-black-275g-100m","title":"NYLON CF10 Schwarz 1,75mm 275g\/100m","description":"\u003ch3\u003eSchwarz None Filament 1.75 für simple, controlled printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e in a 275 g (100 m) spool is usually chosen when you don’t need a full roll sitting on the printer.\u003c\/p\u003e \u003cp\u003eIt’s a compact format, but still enough für real prints — not just quick tests.\u003c\/p\u003e \u003ch3\u003ePrinting that stays predictable\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e, the process settles quickly once your settings are in place.\u003c\/p\u003e \u003cp\u003eThe filament feeds smoothly, extrusion stays even, und layers build consistently.\u003c\/p\u003e \u003ch3\u003eWhen a smaller spool actually helps\u003c\/h3\u003e \u003cp\u003eA 275 g spool gives you more control over material usage und workflow.\u003c\/p\u003e \u003cp\u003eEven at this size, \u003cstrong\u003enone filament 1.75\u003c\/strong\u003e maintains stable output und predictable dimensions.\u003c\/p\u003e \u003ch3\u003eA simple, neutral finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eNone filament Schwarz\u003c\/strong\u003e offers a clean, understated look.\u003c\/p\u003e \u003cp\u003eIt also helps reduce the visibility of small surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor controlled, everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament\u003c\/strong\u003e is often used für prototypes und smaller functional parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e in a 275 g (100 m) spool fits naturally into Flexibel workflows.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e NYLON PA6 CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 255°С - 265°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 100°С - 120°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 250 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 100 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 150 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 60 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":48039990591828,"sku":"NYLON-1008100","price":54.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/nylon-CF10-black-plexiwire-100m.jpg?v=1714386794"},{"product_id":"nylon-cf10-filament-1-75mm-black-550g-200m","title":"NYLON CF10 Schwarz 1,75mm 550g\/200m","description":"\u003ch3\u003eSchwarz None Filament 1.75 für balanced everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e in a 550 g (200 m) spool offers a practical balance between small und full-size rolls.\u003c\/p\u003e \u003cp\u003eIt provides enough material für longer prints while keeping your workflow Flexibel.\u003c\/p\u003e \u003ch3\u003ePrinting that stays consistent\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e, extrusion remains stable und layers build evenly once your setup is dialed in.\u003c\/p\u003e \u003cp\u003eThe filament feeds smoothly und helps reduce small print defects.\u003c\/p\u003e \u003ch3\u003eA spool size that fits real workflows\u003c\/h3\u003e \u003cp\u003eA 550 g spool is well suited für extended prints oder multiple parts without constant interruptions.\u003c\/p\u003e \u003cp\u003eEven at this size, \u003cstrong\u003enone filament 1.75\u003c\/strong\u003e maintains predictable output.\u003c\/p\u003e \u003ch3\u003eA clean, neutral look\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eNone filament Schwarz\u003c\/strong\u003e offers a simple, versatile appearance.\u003c\/p\u003e \u003cp\u003eIt also helps mask minor surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor everyday printing without complications\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament\u003c\/strong\u003e is commonly used für prototypes und general-purpose parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e in a 550 g (200 m) spool integrates easily into regular printing workflows.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e NYLON PA6 CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 255°С - 265°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 100°С - 120°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 550 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 200 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 57 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":48040758280532,"sku":"NYLON-1008200","price":103.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-nylon-cf10-200.jpg?v=1714393090"},{"product_id":"petg-cf10-black-1-75mm-600g-200m","title":"PETG CF10 Schwarz 1,75mm 600g\/200m","description":"\u003ch3\u003eSchwarz None Filament 1.75 für balanced everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e in a 600 g (200 m) spool fits naturally into regular 3D printing workflows.\u003c\/p\u003e \u003cp\u003eIt provides enough material für longer prints while staying manageable.\u003c\/p\u003e \u003ch3\u003ePrinting that settles into place\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e, extrusion stabilizes early und layers build consistently.\u003c\/p\u003e \u003cp\u003eThe filament feeds smoothly und helps reduce small print defects.\u003c\/p\u003e \u003ch3\u003eA spool size that supports real work\u003c\/h3\u003e \u003cp\u003eA 600 g spool is well suited für medium-length prints und repeated parts.\u003c\/p\u003e \u003cp\u003eEven at this size, \u003cstrong\u003enone filament 1.75\u003c\/strong\u003e maintains predictable output.\u003c\/p\u003e \u003ch3\u003eA clean und practical Schwarz finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eNone filament Schwarz\u003c\/strong\u003e offers a simple, neutral appearance.\u003c\/p\u003e \u003cp\u003eIt also helps mask minor surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor steady, everyday printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament\u003c\/strong\u003e is commonly used für prototypes und general-purpose parts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz none filament 1.75\u003c\/strong\u003e in a 600 g (200 m) spool integrates easily into everyday workflows.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e PETG CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 230°С - 255°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 50°С - 70°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 600 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 200 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":51849939091796,"sku":"PETG-1808200","price":83.9,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/PETG-CF-10-Black-200.jpg?v=1747148327"},{"product_id":"abs-cf10-black-1-75mm-500g-200m","title":"ABS CF10 Schwarz 1,75mm 500g\/200m","description":"\u003ch3\u003eCarbon Fiber Reinforced Filament für Technical Printing\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e is intended für makers who need a material suited für technical 3D printing projects. Carbon-fiber reinforced filaments are commonly used in FDM printing when rigidity und dimensional stability become important factors in the final printed part.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e500 g\u003c\/strong\u003e of filament mit an approximate length of \u003cstrong\u003e200 m\u003c\/strong\u003e. With a standard diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, the material fits most desktop FDM printers designed für this filament size.\u003c\/p\u003e \u003cp\u003eIn practice, reinforced materials like this are often chosen when printed parts need to maintain their shape und structure across larger surfaces oder mechanical assemblies.\u003c\/p\u003e \u003ch3\u003eReliable Material für Functional Parts\u003c\/h3\u003e \u003cp\u003eFor many workshops, carbon-fiber reinforced filament becomes a useful option when producing mechanical components oder test prototypes. This \u003cstrong\u003ecf 10 filament Schwarz\u003c\/strong\u003e can be used für brackets, housings, structural elements, oder mounting parts where stiffness helps maintain reliable geometry.\u003c\/p\u003e \u003cp\u003eThe Schwarz color also gives printed parts a clean technical appearance. Many makers prefer \u003cstrong\u003eSchwarz cf 10 filament\u003c\/strong\u003e when printing engineering-style components oder workshop tools because the color naturally fits functional designs.\u003c\/p\u003e \u003cp\u003eDuring prototype development, this type of material is often used für testing shapes, assemblies, und structural layouts before moving into full production.\u003c\/p\u003e \u003ch3\u003eStable Extrusion in Everyday Printing\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, consistent material flow plays an important role in achieving stable prints. A reliable \u003cstrong\u003ecf 10 filament 1.75\u003c\/strong\u003e helps maintain smooth extrusion und predictable layer formation throughout the printing process.\u003c\/p\u003e \u003cp\u003eThat consistency matters when printing objects where dimensional accuracy becomes visible across multiple layers oder when producing parts that must fit together precisely.\u003c\/p\u003e \u003cp\u003eMany makers turn to \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e when they need dependable printing behavior during prototyping cycles oder workshop manufacturing.\u003c\/p\u003e \u003ch3\u003eA Practical Spool Size für Prototyping\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e500 g\u003c\/strong\u003e spool is often convenient für experimentation und development work. For projects that require smaller batches oder multiple material tests, this size helps reduce unused filament while still providing enough material für functional prints.\u003c\/p\u003e \u003cp\u003eFor prototypes, rigid parts, und engineering-focused prints, this \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e offers a practical option für everyday FDM printing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e ABS CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°С - 250°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°С - 110°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 500 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 200 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":53293951320404,"sku":"ABS-1208200","price":85.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-abs-cf10-200.jpg?v=1767019277"},{"product_id":"abs-cf10-black-1-75mm-750g-300m","title":"ABS CF10 Schwarz 1,75mm 750g\/300m","description":"\u003ch3\u003eWorking mit Carbon-Fiber Reinforced Filament\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e is aimed at makers who need a material that behaves predictably when printing functional parts. Reinforced filaments are commonly used in FDM printing when rigidity und shape stability become more important than purely decorative results.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e750 g\u003c\/strong\u003e of filament mit an approximate length of \u003cstrong\u003e300 m\u003c\/strong\u003e. The diameter is \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, which fits the standard configuration used by most desktop FDM printers.\u003c\/p\u003e \u003cp\u003eIn practice, carbon-fiber materials often appear in projects where printed parts must remain stable across larger surfaces oder in assemblies that carry some mechanical load.\u003c\/p\u003e \u003ch3\u003eWhere This Material Is Often Used\u003c\/h3\u003e \u003cp\u003eFor many workshops, \u003cstrong\u003ecf 10 filament Schwarz\u003c\/strong\u003e becomes part of the regular toolkit. It is commonly used für printing brackets, housings, mounts, und structural components that benefit from a more rigid material.\u003c\/p\u003e \u003cp\u003eThe Schwarz color also plays a practical role. In prototype development, darker technical colors make parts easier to integrate visually mit other mechanical elements. Many makers prefer \u003cstrong\u003eSchwarz cf 10 filament\u003c\/strong\u003e when printing workshop tools oder engineering-style components.\u003c\/p\u003e \u003cp\u003eThis type of material is also frequently used during early product development, when designers need to check fit, alignment, oder mechanical layout before moving to production materials.\u003c\/p\u003e \u003ch3\u003ePrinting Behavior in Daily Use\u003c\/h3\u003e \u003cp\u003eConsistency matters more than anything during long print sessions. A reliable \u003cstrong\u003ecf 10 filament 1.75\u003c\/strong\u003e helps maintain steady extrusion und stable layer formation throughout the print.\u003c\/p\u003e \u003cp\u003eWhen extrusion remains predictable, parts tend to keep their intended geometry more reliably. This becomes especially noticeable in larger prints oder in objects where several components must fit together precisely.\u003c\/p\u003e \u003cp\u003eBecause of that, many users turn to \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e when working on prototypes, workshop tools, oder functional mechanical parts.\u003c\/p\u003e \u003ch3\u003eA Practical Spool Size für Workshop Printing\u003c\/h3\u003e \u003cp\u003eA \u003cstrong\u003e750 g\u003c\/strong\u003e spool sits in a convenient middle ground. It provides enough material für functional parts und design testing while remaining manageable für regular printing cycles.\u003c\/p\u003e \u003cp\u003eFor makers producing rigid components oder experimenting mit reinforced materials, this \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e offers a practical option für everyday FDM printing projects.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e ABS CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°С - 250°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°С - 110°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 750 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":53294033338708,"sku":"ABS-1208300","price":136.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs_-300-black_a5867325-def1-43b3-a73f-28c5335ff424.jpg?v=1767008901"},{"product_id":"abs-cf10-black-1-75mm-1kg-400m","title":"ABS CF10 Schwarz 1,75mm 1kg\/400m","description":"\u003ch3\u003eCarbon Fiber Reinforced Filament für Technical Drucke\u003c\/h3\u003e \u003cp\u003eThis \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e is intended für makers who need a material suited für more demanding 3D printing projects. Carbon-fiber reinforced filaments are often used in FDM printing when dimensional stability und structural rigidity are important during the printing process.\u003c\/p\u003e \u003cp\u003eThe spool contains \u003cstrong\u003e1 kg\u003c\/strong\u003e of filament mit an approximate length of \u003cstrong\u003e400 m\u003c\/strong\u003e. With a standard \u003cstrong\u003e1.75 mm\u003c\/strong\u003e diameter, it fits most desktop FDM printers that support this filament size.\u003c\/p\u003e \u003cp\u003eIn many workshops, carbon-fiber materials are chosen für prints that need to stay stiff und maintain their shape even in larger components.\u003c\/p\u003e \u003ch3\u003eDesigned für Functional Parts und Prototyping\u003c\/h3\u003e \u003cp\u003eWhen printing mechanical components oder engineering prototypes, material behavior matters. This \u003cstrong\u003ecf 10 filament Schwarz\u003c\/strong\u003e can be used für parts such as brackets, housings, mounting elements, und structural components where rigidity is useful.\u003c\/p\u003e \u003cp\u003eThe Schwarz color gives printed parts a technical, professional appearance that many makers prefer für functional prints und prototype development.\u003c\/p\u003e \u003cp\u003eFor many users, \u003cstrong\u003eSchwarz cf 10 filament\u003c\/strong\u003e becomes part of the regular material lineup when producing workshop parts oder testing product designs.\u003c\/p\u003e \u003ch3\u003eConsistent Printing mit Reinforced Filament\u003c\/h3\u003e \u003cp\u003eIn day-to-day printing, reinforced filaments benefit from steady extrusion und stable layer formation. A consistent \u003cstrong\u003ecf 10 filament 1.75\u003c\/strong\u003e helps maintain predictable material flow during the printing process.\u003c\/p\u003e \u003cp\u003eThat stability matters when printing parts that need reliable geometry oder when creating larger prints where dimensional consistency becomes more noticeable.\u003c\/p\u003e \u003cp\u003eWhen the printer is properly configured, \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e can support dependable printing für prototypes und technical components.\u003c\/p\u003e \u003ch3\u003eA Material Often Used in Engineering-Style Drucke\u003c\/h3\u003e \u003cp\u003eMany makers reach für \u003cstrong\u003ecf 10 filament Schwarz\u003c\/strong\u003e when the goal is producing rigid parts für workshop use oder testing mechanical designs. Reinforced filaments are often chosen für structural elements that benefit from added stiffness.\u003c\/p\u003e \u003cp\u003eFor prototypes, brackets, und mechanical assemblies, this \u003cstrong\u003eSchwarz cf 10 filament 1.75\u003c\/strong\u003e offers a practical option für everyday engineering-focused FDM printing projects.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e ABS CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 235°С - 250°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 90°С - 110°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 1 kg\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":53294049558868,"sku":"ABS-1208400","price":155.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/abs_-400-black_adbc2da9-4f34-4b21-ab1f-565363a5f26a.jpg?v=1767017836"},{"product_id":"pla-cf10-black-1-75mm-600g-200m","title":"PLA CF10 Schwarz 1,75mm 600g\/200m","description":"\u003ch3\u003eSchwarz CF 10 Filament 1.75 für balanced, reliable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 600 g (200 m) spool is a practical choice für medium-length prints und regular use.\u003c\/p\u003e \u003cp\u003eIt keeps your workflow Flexibel while supporting longer jobs.\u003c\/p\u003e \u003ch3\u003eHow it behaves during printing\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early und remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis helps maintain dimensional stability und cleaner surfaces.\u003c\/p\u003e \u003ch3\u003eWhere CF 10 fits in real use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament Schwarz\u003c\/strong\u003e is commonly used für functional parts, brackets, und structured components.\u003c\/p\u003e \u003cp\u003eIt’s chosen für predictable behavior und repeatable results.\u003c\/p\u003e \u003ch3\u003eA balanced spool für ongoing work\u003c\/h3\u003e \u003cp\u003eA 600 g spool supports medium-length prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament while staying easy to handle.\u003c\/p\u003e \u003ch3\u003eA matte und uniform Schwarz finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e offers a subtle und consistent appearance.\u003c\/p\u003e \u003cp\u003eThe tone remains even across printed surfaces.\u003c\/p\u003e \u003ch3\u003eFor consistent, repeatable results\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e is suited für reliable, repeatable prints.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 600 g (200 m) spool fits into workflows where consistency matters.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e PLA CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 205°С - 220°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 40°С - 60°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 600 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 200 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":53294384021844,"sku":"PLA-608200","price":70.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/PLA-CF-10-Black-200.jpg?v=1767022079"},{"product_id":"pla-cf10-black-1-75mm-900g-300m","title":"PLA CF10 Schwarz 1,75mm 900g\/300m","description":"\u003ch3\u003eSchwarz CF 10 Filament 1.75 für extended, stable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 900 g (300 m) spool is designed für longer prints und repeated production.\u003c\/p\u003e \u003cp\u003eIt supports uninterrupted workflows und consistent output.\u003c\/p\u003e \u003ch3\u003eHow it behaves during longer prints\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early und remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis helps maintain dimensional stability und surface quality.\u003c\/p\u003e \u003ch3\u003eWhere CF 10 fits in real use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament Schwarz\u003c\/strong\u003e is commonly used für functional parts, brackets, und structured components.\u003c\/p\u003e \u003cp\u003eIt’s chosen für predictable behavior und repeatable results.\u003c\/p\u003e \u003ch3\u003eA spool that supports uninterrupted work\u003c\/h3\u003e \u003cp\u003eA 900 g spool supports longer prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament für extended jobs while staying manageable.\u003c\/p\u003e \u003ch3\u003eA matte und consistent Schwarz finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e offers a clean, understated appearance.\u003c\/p\u003e \u003cp\u003eThe tone remains even across printed surfaces.\u003c\/p\u003e \u003ch3\u003eFor steady, repeatable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e is suited für consistent, repeatable prints.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 900 g (300 m) spool fits into workflows where reliability matters.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e PLA CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 205°С - 220°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 40°С - 60°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 900 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":53294444511572,"sku":"PLA-608300","price":136.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/pla-300-black.jpg?v=1764239326"},{"product_id":"pla-cf10-black-1-75mm-1-2kg-400m","title":"PLA CF10 Schwarz 1,75mm 1.2kg\/400m","description":"\u003ch3\u003eSchwarz CF 10 Filament 1.75 für extended, stable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 1.2 kg (400 m) spool is designed für longer prints und repeated production.\u003c\/p\u003e \u003cp\u003eIt supports uninterrupted workflows und consistent output.\u003c\/p\u003e \u003ch3\u003eHow it behaves during printing\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early und remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis helps maintain dimensional consistency und surface quality.\u003c\/p\u003e \u003ch3\u003eWhere CF 10 fits in real use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament Schwarz\u003c\/strong\u003e is commonly used für functional parts, brackets, und structured components.\u003c\/p\u003e \u003cp\u003eIt’s chosen für predictable behavior und repeatable results.\u003c\/p\u003e \u003ch3\u003eA spool designed für uninterrupted workflows\u003c\/h3\u003e \u003cp\u003eA 1.2 kg spool supports longer prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament für extended jobs while staying manageable.\u003c\/p\u003e \u003ch3\u003eA matte und consistent Schwarz finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e offers a clean, understated appearance.\u003c\/p\u003e \u003cp\u003eThe tone remains even across printed surfaces.\u003c\/p\u003e \u003ch3\u003eFor steady, repeatable printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e is suited für consistent, repeatable prints.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 1.2 kg (400 m) spool fits into workflows where reliability matters.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e PLA CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 205°С - 220°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 40°С - 60°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 1.2 kg\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":53294477836628,"sku":"PLA-608400","price":175.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/pla-300-black.jpg?v=1764239326"},{"product_id":"petg-cf10-black-1-75mm-900g-300m","title":"PETG CF10 Schwarz 1,75mm 900g\/300m","description":"\u003ch3\u003eSchwarz CF 10 Filament 1.75 für extended, uninterrupted printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 900 g (300 m) spool is designed für longer prints und repeated production.\u003c\/p\u003e \u003cp\u003eIt keeps your workflow running without interruptions.\u003c\/p\u003e \u003ch3\u003eWhat to expect during printing\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early und remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis steady flow helps reduce defects und keeps surfaces cleaner.\u003c\/p\u003e \u003ch3\u003eWhere it fits in real use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament Schwarz\u003c\/strong\u003e is commonly used für functional parts like brackets und housings.\u003c\/p\u003e \u003cp\u003eIt’s chosen für reliability in everyday use.\u003c\/p\u003e \u003ch3\u003eA larger spool für uninterrupted work\u003c\/h3\u003e \u003cp\u003eA 900 g spool supports longer prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament für extended jobs while staying manageable.\u003c\/p\u003e \u003ch3\u003eA more subdued Schwarz finish\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e offers a more muted, less reflective surface.\u003c\/p\u003e \u003cp\u003eIt also helps reduce the visibility of minor imperfections.\u003c\/p\u003e \u003ch3\u003eFor consistent, long-run printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e is suited für steady, repeatable printing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 900 g (300 m) spool fits workflows where reliability matters.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e PETG CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 230°С - 255°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 50°С - 70°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 900 g\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 300 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":53313743225172,"sku":"PETG-1808300","price":125.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-petg-300-black-new.jpg?v=1727174904"},{"product_id":"petg-cf10-black-1-75mm-1-2kg-400m","title":"PETG CF10 Schwarz 1,75mm 1.2kg\/400m","description":"\u003ch3\u003eSchwarz CF 10 Filament 1.75 für steady, uninterrupted printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 1.2 kg (400 m) spool is designed für longer prints und continuous workflows.\u003c\/p\u003e \u003cp\u003eIt helps keep the process running without interruptions.\u003c\/p\u003e \u003ch3\u003eHow it behaves during printing\u003c\/h3\u003e \u003cp\u003eWith \u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e, extrusion stabilizes early und remains consistent throughout the print.\u003c\/p\u003e \u003cp\u003eThis steady flow helps reduce defects und keeps surfaces cleaner.\u003c\/p\u003e \u003ch3\u003eWhere this material fits\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eCF 10 filament Schwarz\u003c\/strong\u003e is commonly used für brackets, housings, und functional components.\u003c\/p\u003e \u003cp\u003eIt’s chosen für reliability in everyday use.\u003c\/p\u003e \u003ch3\u003eA spool für uninterrupted work\u003c\/h3\u003e \u003cp\u003eA 1.2 kg spool supports longer prints without frequent material changes.\u003c\/p\u003e \u003cp\u003eIt provides enough filament für extended jobs while staying manageable.\u003c\/p\u003e \u003ch3\u003eA clean, matte-like Schwarz appearance\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e offers a more subdued surface finish.\u003c\/p\u003e \u003cp\u003eIt also helps reduce the visibility of minor surface imperfections.\u003c\/p\u003e \u003ch3\u003eFor steady, functional printing\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament\u003c\/strong\u003e is suited für consistent, repeatable prints.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSchwarz CF 10 filament 1.75\u003c\/strong\u003e in a 1.2 kg (400 m) spool fits into workflows where reliability matters.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eManufacturer:\u003c\/b\u003e Plexiwire\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMaterial:\u003c\/b\u003e PETG CF10\u003c\/li\u003e \u003cli\u003e \u003cb\u003eCarbon:\u003c\/b\u003e 10%\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament diameter:\u003c\/b\u003e 1.75 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eExtruder temperature:\u003c\/b\u003e 230°С - 255°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePlatform temperature:\u003c\/b\u003e 50°С - 70°С\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNet weight:\u003c\/b\u003e 1.2 kg\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament length:\u003c\/b\u003e 400 m\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFilament color:\u003c\/b\u003e Schwarz\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical data of the spool\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"list-style_1\"\u003e \u003cli\u003e \u003cb\u003eOuter diameter:\u003c\/b\u003e Ø 200 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eMounting hole diameter:\u003c\/b\u003e Ø 55 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool width:\u003c\/b\u003e 69 mm\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSpool material:\u003c\/b\u003e cardboard\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plexiwire","offers":[{"title":"Standardtitel","offer_id":53313947599188,"sku":"PETG-1808400","price":160.0,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/2203\/9124\/files\/plexiwire-petg-300-black-new.jpg?v=1727174904"}],"url":"https:\/\/shop.plexiwire.com\/de-de\/collections\/filaments-carbon.oembed","provider":"Plexiwire","version":"1.0","type":"link"}